Abstract:In order to represent the mechanical response laws of high-modulus asphalt pavement (HMAP) faithfully and objectively, the viscoelasticity of high-modulus asphalt mixture (HMAM) was considered, and the viscoelastic mechanical responses were calculated systematically based on moving load by numerical simulations. The performances of the HMAP in resistance to the deformation and the cracking at the bottom layer were compared with the ordinary asphalt pavement. Firstly, Lubao and Honeywell 7686 (H7686) were selected as the high modulus modifiers. The laboratory investigations of Asphalt mix-70 penetration, Asphalt mix-SBS (styrene-butadiene-styrene), HMAM-Lubao and HMAM-H7686 were carried out by dynamic modulus tests and wheel tracking tests. The conventional performances related to the purpose of using the HMAM were indicated. The master curves of the storage moduli were obtained and the viscoelastic parameters were fitted based on viscoelastic theories. Secondly, 3D pavement models based on moving loads for the viscoelastic structures were built using the non-linear finite element software ABAQUS. The wheel path was discretized in time and space to apply the Haversine wave load, and then the mechanical responses of four kinds of asphalt pavement were calculated. Finally, the sensitivity analysis was carried out. The results showed that the addition of the high modulus modifiers can improve the resistance to high-temperature rutting of the pavements. Except for the tensile strain and stress at the bottom of the underlayer, other responses decreased with the increases of the dynamic moduli and the change laws of the tensile strain and stress were affected by the range of the dynamic modulus. The tensile stress at the bottom of the asphalt layer would be too large if the modulus of the layer were too large, and a larger tensile strain would result. Therefore, the range of the modulus must be restricted to avoid the cracking due to excessive tension when using the HMAM. The resistance of the HMAP to deformation was better and the HMAP was less sensitive to load changes and could better withstand the adverse effects inflicted by heavy loads.

Comparison of Dynamic and Steady Viscosity in High-Viscosity Modified Asphalt Binder and Analysis of Its Zero Shear Viscosity Test Methods

Research on High- and Low-Temperature Rheological Properties of High-Viscosity Modified Asphalt Binder

Evaluation of Test Methods for Fracture Resistance of High Modulus Asphalt Binders from Rheological and Mechanical Perspectives

Rheological Behavior of High Modulus Asphalt Binder and Its Indication for Fracture Performances

Nonlinear Viscoelasticity and Viscoplasticity Characteristics of Virgin and Modified Asphalt Binders

Effects of Asphalt Binder Type on Mixing Flowability and Workability Index of Asphalt Mixtures

Study on Relaxation Damage Properties of High Viscosity Asphalt Sand under Uniaxial Compression

Nonlinear Viscoelastoplastic Kinetics for High-Temperature Performance of Modified Asphalt Binders

Evaluation of Rheological and Aging Behavior of Modified Asphalt Based on Activation Energy of Viscous Flow

Characterization of the shear-thinning behavior of asphalt binders with consideration of yield stress

Viscoelastic Mechanical Responses of HMAP under Moving Load.

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

A New Short-Term Aging Model for Asphalt Binders Based on Rheological Activation Energy

Research of Method for Solving Relaxation Modulus Based on Three-Point Bending Creep Test

Comparative Analysis of Rheological and Microscopic Performance of SBS Modified Asphalt Based on Field Aging and Laboratory Aging

Viscosity of Asphalt Binder through Equilibrium and Non-Equilibrium Molecular Dynamics Simulations

Study on Viscoelastic Properties of Various Fiber-Reinforced Asphalt Binders

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Rheological Properties of High-Viscosity Modified Asphalt Containing Warm-Mix Additives

Correlation Analysis of Linear Viscoelastic (LVE) Properties, Damage Resistance and Microstructure of Unmodified Asphalt Binders with the Same Penetration Grade

Investigation of the Properties of High-Viscosity Modified Asphalt Binder under Hygrothermal Environments