Abstract:Compared to the ambient vibration test mainly identifying the structural modal parameters, such as frequency, damping and mode shapes, the impact testing, which benefits from measuring both impacting forces and structural responses, has the merit to identify not only the structural modal parameters but also more detailed structural parameters, in particular flexibility. However, in traditional impact tests, an impacting hammer or artificial excitation device is employed, which restricts the efficiency of tests on various bridge structures. To resolve this problem, we propose a new method whereby a moving vehicle is taken as a continuous exciter and develop a corresponding flexibility identification theory, in which the continuous wheel forces induced by the moving vehicle is considered as structural input and the acceleration response of the bridge as the output, thus a structural flexibility matrix can be identified and then structural deflections of the bridge under arbitrary static loads can be predicted. The proposed method is more convenient, time-saving and cost-effective compared with traditional impact tests. However, because the proposed test produces a spatially continuous force while classical impact forces are spatially discrete, a new flexibility identification theory is required, and a novel structural identification method involving with equivalent load distribution, the enhanced Frequency Response Function (eFRFs) construction and modal scaling factor identification is proposed to make use of the continuous excitation force to identify the basic modal parameters as well as the structural flexibility. Laboratory and numerical examples are given, which validate the effectiveness of the proposed method. Furthermore, parametric analysis including road roughness, vehicle speed, vehicle weight, vehicle's stiffness and damping are conducted and the results obtained demonstrate that the developed method has strong robustness except that the relative error increases with the increase of measurement noise.

Uncertainty Quantification and Error Propagation Principle of Structural Flexibility with Time-Varying Dynamic Properties

Structural Flexibility Identification Via Moving-Vehicle-induced Time-Varying Modal Parameters

Structural Flexibility Identification and Fast-Bayesian-based Uncertainty Quantification of a Cable-Stayed Bridge

Time‐varying frequency‐based scaled flexibility identification of a posttensioned concrete bridge through vehicle–bridge interaction analysis

Uncertainty Quantification of Structural Flexibility Identified from Input–output Measurement Data for Reliability Analysis

Dynamic Analysis of Bridge–vehicle System with Uncertainties Based on the Finite Element Model

Dynamic analysis of bridge with non-Gaussian uncertainties under a moving vehicle

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

Flexibility matrix identification using the moving vehicle induced responses for beam type bridge

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

A Computer Vision–aided Methodology for Bridge Flexibility Identification from Ambient Vibrations

Identification and uncertainty quantification of structural flexibility for reliability analysis

Bridge Flexibility Identification Through a Reference-Free Substructuring Integration Method Driven by Mode Fitting

Continuous Force Excited Bridge Dynamic Test and Structural Flexibility Identification Theory

Seismic reliability evaluation of bridges under spatially varying ground motions using a four-parameter distribution

A Precise Time-Integration Linear Vehicle-Bridge Interaction Method and Dynamic Sensitivity Analysis

Influence of Mechanical Uncertainties on Dynamic Responses of a Full-Scale All-Frp Footbridge

Uncertainty Propagation of Flutter Analysis for Long-span Bridges Using Probability Density Evolution Method

Evaluating the response statistics of an uncertain bridge–vehicle system

Dynamic Performance Investigation of a Long-Span Suspension Bridge Using a Bayesian Approach

Structural Flexibility Identification from Impact Test Data Through a Subband Estimation Method