Abstract:Metallic structural materials have a wide range of industrial applications (including in the aviation, aerospace, navigation, military industry, nuclear power, chemical industry, construction, and bridge-building fields) due to their unique properties (such as heat resistance and high strength and toughness). At present, there are development opportunities for metallic structural materials, but these materials are also facing challenges due to the gradual substitution of carbon fiber composites and the increasing shortage of metal mineral resources. China's metallic structural material industry is facing development roadblocks and opportunities. Nanostructured metals and alloys have a wide range of potential industrial applications in the field of aviation, aerospace, navigation, military industry with requirements for energy conservation and weight reduction due to their high strength, but their low fracture elongation is a major limitation. The low ductility of nanostructured metals is caused by their low strain hardening rate; the strain hardening rate is caused by the difficulty of dislocation accumulation. This is because the small grain size limits dislocation propagation and reaction. After more than 20 years of research, the low ductility of nanostructured metals has been improved by tailoring the metal microstructures, such as by introducing nano-precipitation, twin boundaries, multi-scale grain distribution, twinning, or phase transformation, nano-gradient structure, and heterogeneous structure, or by lowering dislocation density, etc. These toughening schemes improve the dislocation accumulation capacity and strain hardening rate of nanostructured metals, and ultimately improve their toughness. The tensile properties of nanostructured metals are closely related to their microstructures and deformation temperature, strain rate, tensile sample size, and loading state.

Toughening of Nanostructured Metals

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Microstructure‐Property Relations in the Tensile Behavior of Bimodal Nanostructured Metals

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

The Limit Velocity and Limit Displacement of Nanotwin-Strengthened Metals under Ballistic Impact

High tensile ductility in a nanostructured metal

Toughening by nano-scaled twin boundaries in nanocrystals

Numerical and experimental comparison of two nano-structuring processing techniques on making stronger stainless steels

Ultrafine grained metals and metal matrix nanocomposites fabricated by powder processing and thermomechanical powder consolidation

Gradient nanostructured steel with superior tensile plasticity

Characterization of nanometals

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites

Tuning Chemical Short-Range Order for Simultaneous Strength and Toughness Enhancement in NiCoCr Medium-Entropy Alloys

Hierarchically ordered coherent interfaces-driven ultrahigh specific-strength and toughness in a nano-martensite titanium alloy

Activating dispersed strain bands in tensioned nanostructure layer for high ductility: The effects of microstructure inhomogeneity

Enhancing the ductility in the age-hardened aluminum alloy using a gradient nanostructured structure

Strong and Plastic Metallic Composites with Nanolayered Architectures

Strain hardening behavior and microstructure evolution of gradient-structured Cu-Al alloys with low stack fault energy

Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries.

Nanodomained Nickel Unite Nanocrystal Strength with Coarse-Grain Ductility

Clustering, nano-scale precipitation and strengthening of steels