Abstract:A new multi-purpose modular small pressurized water reactor with once-through steam generators is being designed in China. Its key parameters are different from traditional large pressurized water reactor. There are sixteen once-through steam generators divided into two groups inside of the pressure vessel. The four coolant pumps are located on the periphery of the pressure vessel. The coolant is heated by the core and transported the heat to the secondary loop by once-through steam generators. The superheated steam is generated, and its dynamics are different from those of U-tube steam generators. The relationship between the reactor and turbine is also complicated and needs to investigate. The control strategies of traditional large pressurized water reactor cannot be applied directly to the small reactor with once-through steam generators. Therefore, it is necessary to investigate suitable control strategies of the multi-purpose modular small reactor with once-through steam generators.Three control strategies are proposed and investigated in this study: turbine-leading, reactor-leading and feedwater-leading. With the reactor-leading strategy, the reactor power is adjusted by moving the control rod. The coolant temperature follows the change of the reactor power. Feedwater flow is applied to regulate the steam pressure. The steam flow rate follows the change of the feedwater flow rate to satisfy the demand power. With the turbine-leading strategy, the steam valve is adjusted which will influence the steam flow to satisfy the demand power. The feedwater-leading control strategy is adjusting the feed water flow rate corresponding to the demand power which has been measured. And reactor power and turbine load vary with feedwater flow rate. Input-output pairings of the control systems are determined based on the different strategies and proportion-integral-derivative(PID) controllers are tuned to meet the control requirements.To evaluate the performance of control strategies, power maneuvering events including a 10%FP (Full Power) step change and a ramp change with a rate of 5%FP/min are simulated. The processes of important control parameters varying with time are compared and evaluated to obtain the suitable one. Conclusions can be drawn from the simulation analyses of the control performance. The reactor-leading control strategy is best for the base-load operation. The turbine leading control strategy is more suitable for load-following operation. The feedwater leading control strategy can be applied to load-following operation with smooth load adjustment.

LQG/LTR Controller Design for Power Control of Small Pressurized Water Reactors under Four Feedback-Controlled Strategies

LQG/LTR Controller Design Based on Improved SFACC for the PWR Reactor Power Control System

Study on Optimization of PID for Feed-water Control System of RB Test in PWR Nuclear Power Station

A coordinated control methodology for small pressurized water reactor with steam dump control system

Robust Controller Design for Small Pressurized Water Reactors Using Non-Smooth Optimization

Comparison Study of Two Control Strategies for the Small Pressurized Water Reactor

Optimization of Control Rod Travel for a Small Pressurized Water Reactor

Control Strategy Investigation For A Multi-Purpose Modular Small Pressurized Water Reactor With Once-Through Steam Generators

A Novel Coordinated Control for Integrated Pressurized Water Reactor

Controller Design and Optimization of Reactor Power Control System for ASPWR

Flexibility control and simulation with multi-model and LQG/LTR design for PWR core load following operation

COORDINATED CONTROL OF A SMALL PRESSURIZED WATER REACTOR

Control of Small Pressurized Water Reactors under Single-Loop Operation Based on MFAPC Theory

Conventional Controller Design for the Reactor Power Control System of the Advanced Small Pressurized Water Reactor

Robust power control design for a small pressurized water reactor using an H infinity mixed sensitivity method

Analysis of Load-Following Characteristics for an Integrated Pressurized Water Reactor

A Feedforward-Feedback-based Reactor Power Decoupling Control Strategy for Multi-Modular Nuclear Power Plants

Load following control and global stability analysis for PWR core based on multi-model, LQG, IAGA and flexibility idea

Load-following adaptive guaranteed cost control of pressurized water reactors

New Strategies with Multi-Model, State-Feedback Control and Stability Analysis for Load-Follow PWR Core

Design of a Model Predictive Controller for Load Tracking in Pressurized Water Reactor