Abstract:This study proposes a refractive index (RI) sensor using a cascaded tapered thin-core microfiber (TTCMF) based on the Vernier effect. The thin-core fiber was made into a TTCMF by arc discharging and flame heating and then sandwiched between two single-mode fibers (SMFs). The two structures with the same SMF-TTCMF-SMF but slightly different free spectral ranges (FSRs) were cascaded to generate the Vernier effect. The FSR varied with the taper parameters of TTCMF. The RI sensitivities of a single TTCMF sensor, series SMF-TTCMF-SMF sensor, and parallel SMF-TTCMF-SMF sensor were compared and analyzed. Using the Vernier effect in the RI measurement range from 1.3313 to 1.3392, a very high RI sensitivity of -15,053.411n m/R I U was obtained using the series SMF-TTCMF-SMF structure, and -16,723.243n m/R I U using the parallel structure, which were basically consistent with the simulation results. Compared with the RI sensitivity of the single TTCMF sensor, the RI sensitivities of series and parallel sensors were increased by 4.65 times and 5.16 times, respectively. In addition, in the temperature range from 35°C to 65°C, temperature sensitivities of -0.196n m/ ∘ C and -0.0489n m/ ∘ C were obtained using series and parallel structures, respectively; the corresponding temperature cross errors were 1.302×10-5 R I U/ ∘ C and 2.92×10-6 R I U/ ∘ C, respectively. Based on the advantages of high RI sensitivity, simple structure, low-temperature cross sensitivity, and convenient fabrication, the proposed sensors have great potential in biosensing fields.

Refractive Index Sensor Based on Excessively Tilted Fiber Grating Sagnac Vernier Interferometer

Refractive Index Sensor Based on Tilted Fiber Bragg Grating and Stimulated Brillouin Scattering.

High sensitivity refractive index sensor based on tilted fiber Bragg gratings

Ultrasensitive and Wide-Measuring-Range Refractive Index Sensor with Optical Path Length-Tunable Vernier Effect

Refractive Index Sensor Based on a Pair of Hybrid 45° and 81° Tilted Fiber Gratings

Temperature-insensitive refractive index sensor based on tilted fiber Bragg grating

High Sensitivity Refractometer Based on Tapering Two-Mode Fiber Embedded Long-Period Fiber Grating

High Sensitivity Refractive Index Sensor Based on Large-Angle Tilted Fiber Grating with Carbon Nanotube Deposition

Optical Vernier Sensor Based on a Cascaded Tapered Thin-Core Microfiber for Highly Sensitive Refractive Index Sensing.

Optimization of Long-Period Grating-Based Refractive Index Sensor by Bent-Fiber Interference

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Combined-Vernier effect based on hybrid fiber interferometers for ultrasensitive temperature and refractive index sensing

Study on spectral and refractive index sensing characteristics of etched excessively tilted fiber gratings

Optical Refractive-Index Sensor Based on Dual Fiber-Bragg Gratings Interposed with a Multimode-Fiber Taper

Compact refractive index sensor based on offset splicing long-period fiber grating

Temperature Self-Compensated Refractive Index Sensor Based on Fiber Bragg Grating and the Ellipsoid Structure

Temperature-insensitive refractive index sensor based on high-order-resonance short-line long-period fiber grating

A Refractive Index Insensitive Temperature Sensor Based on 45°-Tilted Grating Pair

Cascaded Tilted Fiber Bragg Grating for Enhanced Refractive Index Sensing

Refractive Index Sensor Based on Θ-Shaped Microfiber Resonator and Vernier Effect

Liquid level sensor based on an excessively tilted fibre grating