Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Bandpass Filter and Diplexer Based on Short-Circuited Stub-Embedded Resonators and Novel Coupling Scheme

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

Compact Dual-Band Bandpass Filter and Diplexer Using Hybrid Resonant Structure with Independently Controllable Dual Passbands

Compact Dual-Band Bandpass Filter Using Stub-Loaded Stepped Impedance Resonators with Mixed Electric and Magnetic Couplings

Compact dual-band bandpass filter using spiral resonators and short-circuited stub-loaded resonator

Novel Compact Dual-Band BPF Using Stub-Loaded Shorted Stepped-Impedance Resonators

Design of Compact Tri-Band Bandpass Filter Using Stub-Loaded Quarter-Wavelength SIRs

Tri-band bandpass filter using shorted stub-loaded dual-mode resonators

A Three-Pole Substrate Integrated Waveguide Bandpass Filter Using New Coupling Scheme

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact Diplexer with High Isolation and Wide Stopband Based on SIRs

Compact Dual-Band Differential Bandpass Filter Using Quadruple-Mode Stepped-Impedance Square Ring Loaded Resonators.

Miniaturized Mixed-Cross Coupling Bandpass Filter with Source–load Coupling

Compact Dual-Band Bandpass Filter with Improved Stopband Characteristics

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

Miniaturized Tri-Band Bandpass Filter Design Using Quarter-Wavelength Shunted-Line Stepped-Impedance Resonators (slsirs) with Multi-Transmission Zeros

A Quad‐band Bandpass Filter Using Split‐ring Based on T‐shaped Stub‐loaded Step‐impedance Resonators

Novel Hybrid Four‐mode Microstrip Bandpass Filter Using Two Paralleled Stub‐loaded Resonators

Compact Dual‐band Bandpass Filter Using Coupled Lines and Shorted Stubs