Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

A Four‐pole Single Passband Filter Based on Planar Multilayered Closed Cavity with Three Magnetic Side Walls

Compact cross-coupled circular cavity filters using multilayer substrate integrated waveguide

Design of multilayer triangular substrate integrated waveguide filter in LTCC

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Compact Substrate Integrated Waveguide (SIW) Transversal Filter with Triple-Mode Microstrip Resonator

Compact quasi-elliptic bandpass filter based on folded ridge substrate integrated waveguide (FRSIW)

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Compact and Wide Stopband Bandpass Filters Based on Dual-Mode Folded Circular Substrate Integrated Waveguide Cavities

A Novel Multi-layer Filter Based on Quarter-Mode Substrate Integrated Waveguide Cavities

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

A Design Method to Realize Manufacture-Friendly Millimeter-Wave Folded Substrate Integrated Waveguide Bandpass Filters

Design of Vertically Integrated Folded SISL Patch Bandpass Filters With Single and Multiband Responses

Design of Dual-band Filtering Antenna Based on 3-D Printed Half-mode Gap Waveguide Quadruple-mode Resonator

A Compact Dual-Band Bandpass Superconducting Filter Using Microstrip/CPW Spiral Resonators