Abstract:In search for new technology to preserve global warming caused by fossil fuel, solar energy driven devices have been high in demand. For instance, photovoltaics (PV) are a promising technology that can produce high power conversion efficiency (PCE). In addition, photoelectrochemical (PEC) water splitting, a promising artificial photosynthesis method, is a potential alternative technique to generate renewable fuel. PEC devices can generate renewable energy sources such as hydrogen, which can alleviate CO 2 emission from fossil fuels. However, most readily employed PEC devices require external bias to function as a hydrogen producer. Thus, utilizing PV active layer as a photo absorber, PEC system is a suitable approach to the breakthrough of efficient hydrogen production. In the past decade of PV technology advances, organic-inorganic lead halide perovskite (LHP) can be arguably the most progressive research because of its tunable bandgap, fast charge separation, broad light absorption spectra, low cost, facile fabrication, and high efficiency. These advantageous properties led LHPs to be used as an active layer of water splitting devices. However, LHP-based PECs have flaws to be addressed to be viable material for PEC. LHP are known for their fragile nature from exposure to water. Hence, LHP-based PECs are commonly protected with metal foil encapsulation while covering the edges with epoxy resins. However, the metal foil provides poor contact with the LHP leading to poor charge transfer for water splitting. To solve this problem, we applied carbon conductive powder (CCP) as the interlayer to successfully facilitate charge transfer. With the proposed device modeling, monolithic PEC device that is capable of generating hydrogen in presence of low external applied bias is fabricated. Nonetheless, single monolithic PEC devices still need external applied bias to function as water splitting device which seek for further research. Therefore, adding another photoelectrode will eliminate the necessity of external bias resulting in an only solar powered water splitting device. Herein, we report unassisted solar to hydrogen conversion by using inverted and planar type LHP solar cells as photocathode and photoanode, respectively. With the integration of catalyst, 3D Ni.NiFe and NiPCoP, LHP-based PEC with exceptional performance was attained. We demonstrated unbiased PEC water splitting using a coupled LHP-based photoelectrode under alkaline conditions. Each LHP-based photoelectrode exhibited a outstanding performance of 22.42 mA cm -2 at 1.23 V RHE and 21.96 mA cm -2 at 0 V RHE for the photoanode and photocathode, respectively. Thus, we achieved solar to hydrogen (STH) of 10.64% and unassisted photo-current density of 8.65 mA/cm 2 . In addition, unbiased catalytic reactivity over 20 h retaining about 60% of photo-current density was attained.

An Integrated Metal‐Free Modification Method to Construct Efficient and Durable Bulk Heterojunction Photocathode for Solar Hydrogen Production

Highly Efficient 2D/3D Structured CuCo2S4/CdIn2S4 Composites with a P–n Heterojunction for Boosting Photocatalytic Hydrogen Evolution

A Thin-Film Silicon Based Photocathode With A Hydrogen Doped Tio2 Protection Layer For Solar Hydrogen Evolution

Hydrogen-substituted graphdiyne encapsulated cuprous oxide photocathode for efficient and stable photoelectrochemical water reduction

Carbon-based Photocathode Materials for Solar Hydrogen Production

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Solution‐Processed Fabrication of Ni3S2‐Based Nanoheterostructure on Silicon Heterojunction Photocathode for Boosting Solar Hydrogen Generation

Coupled Lead Halide Perovskite Photoelectrode for Unbiased Photoelectrochemical Water Splitting

π-d Electron-Coupled PBDIT/CdS Heterostructure Enables Hole Extraction for Efficient Photocatalytic Hydrogen Production

Manipulating metal-oxygen local atomic structures in single-junctional p-Si/WO3 photocathodes for efficient solar hydrogen generation

A CdS@(PEA)2SnBr4 Heterojunction Photocatalyst for High-efficiency Hydrogen Production

Polymer/non-fullerene acceptor bulk heterojunction nanoparticles for efficient photocatalytic hydrogen production from water

Rational Design of Porous Conjugated Polymers and Roles of Residual Palladium for Photocatalytic Hydrogen Production

Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Combined heterostructures between Bi2S3 nanosheets and H2-treated TiO2 nanorods for enhanced photoelectrochemical water splitting

Z-type heterojunction Pt/Zn0.2Cd0.8S/Cs3PW12O40: Mitigating photocorrosion, leveraging photochromism, and efficient photocatalytic hydrogen evolution

General In Situ Photoactivation Route with IPCE over 80% toward CdS Photoanodes for Photoelectrochemical Applications

Rational design of ZnCdS/TpPa-1-COF heterostructure photocatalyst by strengthening the interface connection in solar hydrogen production reactions

Photoelectrochemical Cells for Solar Hydrogen Production: Current State of Promising Photoelectrodes, Methods to Improve Their Properties, and Outlook

Scalable Low-Band-Gap Sb2Se3 Thin-Film Photocathodes for Efficient Visible-Near-Infrared Solar Hydrogen Evolution

Recent Advancements in Photoelectrochemical Water Splitting for Hydrogen Production