Abstract:In the turbo-compressor driving system, working fluid of large capacity and high pressure is stored in the system. Once an accident happened unexpectedly, the driving power of the rotor would be shut off quickly. Owing to the pressure difference between the inlet and the outlet of the compressor, the original downstream fluid might flow back from the volute to the impeller. The backflow might propel the impeller rotating reversely compared with its working status. It would damage the bearing and sealing system. Therefore, it is necessary to avoid the rotor reversal. With the development of the economies of scale, the capacity of the compressor unit becomes larger and larger, the possibility of the rotor reversal accident might be in consideration. The reverse performance of the centrifugal impeller is related to the mass flowrate of the backflow, the backflow pressure, moment of inertia as well as the initial working rotating speed of the rotor. In order to get the quantitative relation of the parameters, a test rig was set up with a centrifugal fan. The parameter was tested on the idle processes with different initial rotating speeds. Compared with the idle process, the reduction processes of the rotating speed driven by the backflow were tested. The processes varied with the pressure and the flowrate of the backflow. In addition, three-dimension simulation on the fan was performed. Corresponding to the experimental data, numerical performance of the fan was got to verb the numerical method The flow information in the fan with backflow was analyzed. Even the backflow passing through the impeller, there is small flowrate to the volute by the operating fan. Combined with experimental data and the numerical parameters, the theoretical analysis on the reduction process of rotating speed was carried out. The critical values of the initial working rotating speed, the pressure and the flowrate of the backflow were derived to avoid the reverse rotation. Therefore, it can be used for the fan system in the design process to prevent the reverse rotation.

Effect of Motor Intrusion on the Aerodynamic Performances and Unsteady Characteristics of Internal Flow of a Volute-Free Centrifugal Fan

Effects of the Installation of Driven Motor at the Impeller Eye on Performance of Volute-Free Centrifugal Fan

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

Numerical simulation of internal flow in forward-curved centrifugal fan

Effects of Inclined Volute Tongue Structure on the Internal Complex Flow and Aerodynamic Performance of the Multi-Blade Centrifugal Fan

Study of the Flow in the Volute of Centrifugal Fan

Study On The Reverse Rotating Character Driven By The Backflow On A Centrifugal Fan System

Effect of Volute-Tongue Clearance on the Aerodynamic Performance and Noise of Multi-Wing Centrifugal Fan for Air Conditioning

A design method of volute profile of multi-blade centrifugal fan based on DRBF model

Unsteady internal flow field simulations in a double suction centrifugal fan

Design Method for the Volute Profile of a Squirrel Cage Fan With Space Limitation

Asymmetric flow in a double-suction centrifugal fan induced by an inclined impeller

Numerical Investigation on Impact of Blowing Control in Flush-Mounted S-Shaped Inlet to Rear Fan-Stage Performance

Study on the Main Factors Affecting the Noise of the Small High-Speed Centrifugal Fan

Effect of Inlet Box on Performance of Axial Flow Fans

3d Numerical Simulation Of Centrifugal Fan Inside Flow Field And Modification Investigation

Effect of Interaction between Centrifugal Impeller and Volute Tongue on the Performance and BPF Noise

Diagnosis and Design Improvement of the Internal Flow Field in an Automotive Cooling Fan Based on Boundary Vorticity Dynamics, Part I: Blade Profile Scaling and Rotation

Discussion on the Anti-vortex Ring Affect the Performance of Centrifugal Fan

Experimental and Numerical Analysis on the Effect of Inlet Distortion on the Performance of A Centrifugal Fan with A Mixing Chamber

Experimental Study and Numerical Analysis on Improving the Performance of Multi-blade centrifugal Fan by Changing the Volute Position