Abstract:The application of a robot manipulator to the task of parts assembling or collaboration with human workers requires compliant control and intrinsic safety. As a result, it is necessary to exert accurate torque on each joint of the robot through torque sensing and implementing closed-loop joint torque control. This torque servo system is required to track reference torque signals while operating under the influence of motor friction, flexibility of the harmonic drive, noise from the sensor, robot dynamics modelling error and other unknown certainties, resulting in large control efforts. This paper focuses on providing better compliance control for collaborative robots and proposes a joint torque controller design under development with active disturbance rejection concept. The controller is designed through a novel extended state observer to estimate and compensate for the unmodelled dynamics of the system, nonlinearly variable motor friction, and other uncertainties. Then, a simple proportional differential controller is designed to produce control law. In spite of the remarkable performance in dealing with the mechanical dynamics of the joint actuator, the original controller does not work well with the electrical factor of the joint actuator due to the limited current loop bandwidth in the hardware of motor and driver. To eliminate the detrimental effect of the time delay in current servo, a predictive output method based on a nonlinear tracking differentiator (TD) is used to improve the controller within the framework of active disturbance rejection control. Both simulations and experiments are conducted on a prototype one degree of freedom manipulator with a joint torque sensor. The results demonstrate the enhancement of both the system stability and disturbance rejection performances. Based on the proper treatment of actuator delay, the dominant effect of the motor friction and the flexibility of the harmonic drive has been reduced to insignificance. Moreover, the proposed controller is easy to implement because the explicit dynamic model of the system is not required.

A Robust Torque Controller Based on Link-side Damping Assignment for Flexible Joint Robots

Modeling and Control of Flexible Joint Robotic Manipulator

Joint Torque Control of a Collaborative Robot Based on Active Disturbance Rejection with the Consideration of Actuator Delay

Robust Approach for Humanoid Joint Control Based on A Disturbance Observer

Model-Free Robust Joint Control of Flexible Joint Robots

Observer-Based Output Feedback Tracking Control for Flexible Joint Space Manipulator with Output Constraints

Impedance Control of Collaborative Robots Based on Joint Torque Servo with Active Disturbance Rejection.

Compliant Control of Flexible Joint by Dual-Disturbance Observer and Predictive Feedforward

Robust Design of Reaction Torque Measurement System Based on Disturbance Observer

Position Control of Flexible Joint Robots with PD Controller Based on Disturbance Observer.

Decentralized Robust Control of Uncertain Robots with Backlash and Flexibility at Joints

Disturbance Observer-Based Fault-Tolerant Control for Robotic Systems with Guaranteed Prescribed Performance.

Robust Control of Two-Link Manipulator with Disturbance Torque and Time-Varying Mass Loads

Observer-based Two-Time Scale Robust Control of Free-Flying Flexible-Joint Space Manipulators with External Disturbances

Robust Control of a 3-DOF Hybrid Robot Manipulator

Robust disturbance observer based control for multi-variable systems

Robust Tracking Control of Electrical Driven Free-Floating Space Robot Manipulators

Design for Flexible Joint Controller Based on a New Compensation Control Strategy

Robust Command-Filtered Control of Compliant Actuator-Driven Robotic Manipulators by Employing Beneficial Disturbances

A Method to Regulate the Torque of Flexible-Joint Manipulators with Velocity Control Inputs

Decentralized Robust Exact Tracking Control for 2-DOF Planar Robot Manipulator