Abstract:Modern turbocharging has imposed multiply stringent requirements on turbocharger compressor impellers. They must be highly efficient and quiet in operation, have longevity in service, be cheaply made and be quick to market. The traditionally cast compressor impellers are struggling to meet these demands. The turbocharger compressor impellers machined from solid have many advantages in geometric accuracy, material property and design-to-production time compared with their cast counterpart. However, the benefits of machined impeller had been hindered by high manufacturing cost. The high cost comes mainly from long machining time with traditional five-axis point milling. Compared with the point milling, five-axis flank milling has much higher material removal rate, and this significantly reduces machining cost and makes machining from solid competitive. Turbocharger industry uses to design their impellers for casting or five-axis point-milling, and the impeller blade surfaces are usually freeform surfaces. Current CAM (Computer Aided Manufacture) software has provided flank milling function for smooth straight-line-surfaces (SLS), but they cannot handle the freeform surfaces. The conversion from arbitrary surface to SLS becomes necessary. The conversion method has been developed, but few of them concern the important manufacturing constraints such as the smoothness of cutter movement and the developability of the SLS. Furthermore, the conversion may be used in the manufacturing process only, and the effect of the deviation between the original freeform surface and the SLS may be ignored. In this paper, we put forward a new approach. First a flank milling conversion method is described. It takes into account of important manufacturing constraints when converting an arbitrary surface into a SLS. The method is fast and produces good approximation. Next we describe how the method can be integrated into daily impeller design suite to make impeller design and subsequent manufacturing more effective. The approach is illustrated and verified by the design and machining experiment of a turbocharger impeller.

Screw Rotor Manufacturing Via 5-Axis Flank CNC Machining Using Conical Tools

Highly accurate 5-axis flank CNC machining with conical tools

A Novel Helical Milling End-Effector and Its Application

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Efficient 5-Axis CNC Trochoidal Flank Milling of 3D Cavities Using Custom-Shaped Cutting Tools

An efficient five-axis machining method of centrifugal impeller based on regional milling

Towards Efficient 5-Axis Flank CNC Machining of Free-Form Surfaces Via Fitting Envelopes of Surfaces of Revolution

5-axis double-flank CNC machining of spiral bevel gears via custom-shaped milling tools — Part I: Modeling and simulation

Five-Axis Flank Milling of Impellers: Optimal Geometry of A Conical Tool Considering Stiffness and Geometric Constraints

Five-Axis Flank Milling for Design and Manufacture of Turbocharger Compressor Impeller

Precision Grinding of Screw Rotors Using CNC Method

Judging of Machining Feasibility and Calculation of Midsection for the Five-Axis Milling of Shrouded Centrifugal Impeller

Optimum Positioning Conical Tool for Flank Milling of Ruled Surface

Geometry of Intersecting-Axis Conical Twin-Screw Rotors

Using Rotary Contact Method for 5-Axis Convex Sculptured Surfaces Machining

5-axis double-flank CNC machining of spiral bevel gears via custom-shaped tools—Part II: physical validations and experiments

Cutter Size Optimisation And Interference-Free Tool Path Generation For Five-Axis Flank Milling Of Centrifugal Impellers

Algorithm for 5-axis Numerical Control Flank Milling of Arbitrary Surfaces

Technological assurance of the accuracy of cycloidal helical surfaces when processing them with a non-profiled tool on CNC machines

Geometric characteristics analysis and parametric modeling for screw rotor precision machining