An Automated Approach to Calculating the Maximum Diameters of Multiple Cutters and Their Paths for Sectional Milling of Centrifugal Impellers on a 4½-Axis CNC Machine
Baohai Wu,Zezhong C. Chen,Ming Luo,Dinghua Zhang,Feiyan Han
DOI: https://doi.org/10.1016/j.cja.2018.11.006
IF: 5.7
2018-01-01
Chinese Journal of Aeronautics
Abstract:Power generators and chemical engineering compressors include heavy and large centrifugal impellers. To produce these impellers in high-speed machining, a 4½-axis milling machine (or a 4-axis machine plus an indexing table) is often used in the industry, which is more rigid than a 5-axis milling machine. Since impeller blades are designed with complex B-spline surfaces and impeller channels spaces vary significantly, it is more efficient to use multiple cutters as large as possible to cut a channel in sections and a blade surface in patches, instead of only using a small cutter to machine a whole blade and a channel. Unfortunately, no approach has been established to automatically calculate the largest diameters of cutters and their paths, which include the indexing table angles. To address this problem, an automated and optimization approach is proposed. Based on the structure of a 4½-axis machine, a geometric model for a cutter gouging/interfering the impeller is formulated, and an optimization model of the cutter diameter in terms of the indexing table angle is established at a cutter contact (CC) point on a blade surface. Then, the diameters of the tools, their orientations, and the indexing table angles are optimized, and each tool’s paths are generated for machining its corresponding impeller section. As a test, an impeller is efficiently machined with these tools section by section; thus, this approach is valid. It can be directly used in the industry to improve efficiency of machining centrifugal impellers.