Abstract:The ever-increasing silicon photovoltaics industry produces a huge annual production of silicon waste (2.03 × 105 tons in 2019), while lignin is one of the main waste materials in the traditional paper industry (7.0 × 107 tons annually), which lead to not only enormous wastage of resources but also serious environment pollution. Lithium-ion batteries (LIBs) are the dominating power sources for portable electronics and electric vehicles. Silicon (Si)-based material is the most promising anode choice for the next-generation high-energy-density LIBs due to its much higher capacity than the commercial graphite anode. Here, we proposed the use of these silicon and lignin waste as sustainable raw materials to fabricate high-capacity silicon/carbon (Si/C) anode materials for LIBs via a facile coprecipitation method utilizing electrostatic attracting force, followed by a thermal annealing process. The as-achieved Si/C composite featured an advanced material structure with micrometer-sized secondary particles and Si nanoparticles embedded in the carbon matrix, which could tackle the inherent challenges of Si materials, including low conductivity and large volume change during the lithiation/delithiation processes. As expected, the obtained Si/C composite displayed an initial charge capacity of 1016.8 mAh g–1, which was 3 times that of a commercial graphite anode in the state-of-the-art LIBs, as well as a high capacity retention of 74.5% at 0.2 A g–1 after 100 cycles. In addition, this Si/C composite delivered superior rate capability with a high capacity of 575.9 mAh g–1 at 2 A g–1, 63.4% of the capacity at 0.2 A g–1. The utilization of industrial Si and lignin waste provides a sustainable route for the fabrication of advanced high-capacity anode materials for the next-generation LIBs with high economic and environmental feasibility.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16865?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16865</a>.Additional experimental data including SEM, TEM, and HR-TEM images of Si–C and Si/C composite after cycles and EIS spectra of Si/C and pure Si before cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16865/suppl_file/am0c16865_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Construction of Porous Si/Ag@C Anode for Lithium-Ion Battery by Recycling Volatile Deposition Waste Derived from Refining Silicon.

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

In Situ Synthesis of Carbon Doped Porous Silicon Nanocomposites As High-Performance Anodes for Lithium-Ion Batteries.

Construction of P-Sinps/Ag@C Composites by Silver-Assisted Etching Residual Silicon Waste Toward Anode Material for Lithium-Ion Battery

Three-Dimensional Porous Si@SiOx/Ag/CN Anode Derived from Deposition Silicon Waste toward High-Performance Li-Ion Batteries

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Recycling of photovoltaic silicon waste for high-performance porous silicon/silver/carbon/graphite anode

Constructing triple-protected Si/SiOx@ZnO@C anode derived from volatile silicon waste for enhanced lithium storage capacity

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries.

Scalable Synthesis of High-Performance Si/CNTs/C Anodes for Lithium-Ion Batteries Based on Recycling of Silicon Cutting Waste

A nanosilver-actuated high-performance porous silicon anode from recycling of silicon waste

Simultaneous Purification and Perforation of Low-Grade Si Sources for Lithium-Ion Battery Anode.

Cost-effective preparation of high-performance Si@C anode for lithium-ion batteries

Silver-Assisted Chemical Etching for the Fabrication of Porous Silicon N-Doped Nanohollow Carbon Spheres Composite Anodes to Enhance Electrochemical Performance

In-Situ Preparation Of Si@C Composite Anode Materials For Lithium Ion Batteries

PSi@SiOx/Nano-Ag composite derived from silicon cutting waste as high-performance anode material for Li-ion batteries

Recycling of Lignin and Si Waste for Advanced Si/C Battery Anodes

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Scalable Synthesis of Porous Silicon by Acid Etching of Atomized Al-Si Alloy Powder for Lithium-Ion Batteries