Abstract:The effect of cold-drawing on the tensile property and giant magneto-impedance (GMI) effect of melt-extracted Co-based amorphous microwires was evaluated through detailed analyses of the distribution of residual stress and microstructural evolution. The tensile ductility and tensile strength increased gradually with cross-sectional area reduction ratio (R) until 51%, and decreased with further deformation. The microwire with R=51% exhibits the highest tensile ductility of 1.09% and tensile strength of 4320MPa. Structural and thermodynamic analyses reveal that it is the mechanical deformation rather than thermal activation that induces the precipitation of nanocrystals and arrests the quick extension of shear bands leading to the enhanced ductility. Interestingly, the GMI effect also attains the maximum value of 160% at 10MHz when R=51% (30% larger than that of the as-cast wires), before decreasing with further cold-drawing. Such an identical evolution trend of both tensile and GMI properties can be ascribed to two underlying mechanisms: the generation of longitudinal and circumferential residual stresses and the growth of deformation-induced nanocrystals during cold-drawing. The role of residual stress is established herein not only as a trigger to accelerate the amorphous-to-nanocrystalline phase transformation but also as a decisive contributor to the mechanical and GMI performance. The unique simultaneous improvement of both mechanical and GMI properties of cold-drawn Co-based microwires opens up new possibilities for a variety of engineering applications, such as high-performance magnetic, stress and biological sensors.

Bending Annealing Induced Transformation of Magnetic Structure in Co-rich Amorphous Microwires

Effect of Chemical Ordering Annealing on Martensitic Transformation and Superelasticity in Polycrystalline Ni–Mn–Ga Microwires

Evolution of the Magnetic Anisotropy and Magnetostriction in Co-based Amorphous Alloys Microwires Due to Current Annealing and Stress -Sensory Applications

Optimizing the Nano-structure of Magnetic Micro-wires for Multifunctional Macro-composites

Structural, Magnetic and Mechanical Properties of Oligocrystalline Ni-Mn-Ga Shape Memory Microwires

Effect of Annealing on the Magnetostatic and Microwave Electromagnetic Properties of Glass-Coated Fe-Rich Microwires

Magnetic anisotropy and stress-magnetoimpedance (S-MI) in current-annealed Co-rich glass-coated microwires with positive magnetostriction

Temperature Dependence of Magnetic Property for Glass-Coated Metal Microwires

Spiral Annealing of Magnetic Microwires

Temperature-stable magnetoimpedance (MI) of current-annealed Co-based amorphous microwires

Effect of Tension Annealing on Giant Magneto-Impedance in Glass-Covered Co-rich Amorphous Wire

Improving Mechanical and Magnetocaloric Responses of Amorphous Melt-Extracted Gd-based Microwires Via Nanocrystallization

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Co-Based Magnetic Microwire and Field-Tunable Multifunctional Macro-Composites

Evolution of Magnetic Phases Upon Annealing in Glass-Coated Fe–Ni–Cu Microwires

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Optimizing magnetoimpedance of amorphous microwires by nanocarbon-induced magnetic anisotropy

Preparation and magnetic properties of Co2-based Heusler alloy glass-coated microwires with high Curie temperature

Enhancing GMI properties of melt-extracted Co-based amorphous wires by twin-zone Joule annealing

Tuning of magnetocaloric effect and optimization of scaling factor for Gd 55 Ni 10 Co 35 amorphous microwires