Abstract:Transition metal oxide materials Li(NiMnyCoz)O-2 (NMC) based on layered structures are expected to replace LiFePO4 in automotive Li-ion batteries because of their higher specific capacity and operating potential. However, the actual usable capacity is much lower than the promised theoretical value [Uchaker, E.; Cao, G. Nano Today 2014 9, 499-524; Tarascon, J.-M.; Armand, M. Nature 2001 414, 359-367], in addition to the often poor cycling performance and the first-cycle Coulombic efficiency, for which Mn(II)-dissolution, its immobilization in solid electrolyte interface (SEI), oxidation of electrolytes by Ni, and other parasitic process thereat have been held responsible [Zhan, C., et al. Nat. Commun. 2013 4, 2437; Wang, L,et al. J. Solid State Electrochem. 2009 13, 1157-1164; Lin, F., et al. Nat. Commun. 2014.5, 4529]. Previously, we reported a composite Li(Ni0.5Mn0.3Co0.2)O-2 (NMC532) depolarized by the embedded carbon nanotube (CNT) and achieved capacity close to the theoretical limit [Wu, Z., et al. Nano. Lett. 2014 14, 4700-4706]; unfortunately, this high capacity failed to be maintained in long-term cycling due to the degrading contacts between the active ingredient and CNT network. On the basis of that NMC532/ CNT composite, the present work proposes a unique "prelithiation process", which brought the cathode to low potentials before regular cycling and led to an intetphase that is normally formed only on anode surfaces. The complete coverage of cathode surface by this, similar to 40 nm thick interphase effectively prevented Mn(II) dissolution and minimized the side reactions of Ni, Co, and Mn at the NMC interface during the subsequent cycling process. More importantly, such a "prelithiation" process activated a structure containing two Li layers near the surface of NMC532 particles, as verified by XRD and first principle calculation. Hence, a new cathode material of both high capacity with depolarized structure and excellent cycling performance was generated. This new structure can be incorporated in essentially all the NMC-based layered cathode materials, providing us with an effective tool to tailor-design future new cathode materials for lithium batteries.

Constructing High Performance Li-rich Mn-based Cathode Via Surface Phase Structure Controlling and Ion Doping

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

In Situ Surface Coating and Oxygen Vacancy Dual Strategy Endowing a Li-Rich Li 1.2 Mn 0.55 Ni 0.11 Co 0.14 O 2 Cathode with Superior Lithium Storage Performance

Surface Modification Driven Initial Coulombic Efficiency and Rate Performance Enhancement of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode

A Bifunctional-Modulated Conformal Li/Mn-Rich Layered Cathode for Fast-Charging, High Volumetric Density and Durable Li-Ion Full Cells

Design of a new Li-rich Mn-based ternary cathode material based on Ni, Co, and Mn action mechanism

Enhancing Performances of Co-free Li-rich Mn-based Layered Cathode Materials Via Interface Modification of Multiple-Functional Mn3O4 Shell

Multiscale Deficiency Integration by Na-Rich Engineering for High-Stability Li-Rich Layered Oxide Cathodes

Exploit Li2MnO3 Activity by Two Phase Coexistence at Atomic Level Towards High Performance Mn-based Co-free Li-rich Cathodes

Surface Phase Transformation and CaF2 Coating for Enhanced Electrochemical Performance of Li-rich Mn-based Cathodes

Suppressed Phase Separation in High-Voltage LiNi0.5Mn1.5O4 Cathode Via Co-doping

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Interphase Modification of Li(Ni0.5Co0.2Mn0.3)O2 Based Lithium Battery Electrode Materials by Depolarized and Pre-Lithiation for High Capacity and Cycling Performance

Bulk and surface reconstructed Li-rich Mn-based cathode material for lithium ion batteries with eliminating irreversible capacity loss

Prelithiation Activates Li(Ni0.5Mn0.3Co0.2)O-2 for High Capacity and Excellent Cycling Stability

In-situ formation of Li0.5Mn0.5O coating layer through defect controlling for high performance Li-rich manganese-based cathode material

Achieving Long‐Life Ni‐Rich Cathodes with Improved Mechanical‐Chemical Properties Via Concentration Gradient Structure

Exploit Li 2 MnO 3 activity by two phase coexistence at atomic level towards high performance Mn-based Co-free Li-rich cathodes

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

One-step Surface-to-bulk Modification of Single-Crystalline Ni-rich Co-poor Cathodes for High-Rate and Long-Life Li-ion Batteries at High-Voltage Operations

Enhanced electrochemical performances of single crystal layered LiNi0.5Mn0.5O2 cathode through Na doping