Abstract:Purpose: To judge the injury mode and injury severity of the real human body through the measured values of anthropomorphic test devices (ATD) injury indices, the mapping relationship of lumbar injury between ATD and human body model (HBM) was explored. Methods: Through the ATD model and HBM simulation, the mapping relationship of lumbar injury between the 2 subjects was explored. The sled environment consisted of a semi-rigid seat with an adjustable seatback angle and a 3-point seat belt system with a seatback-mounted D-ring. Three seatback recline states of 25°, 45°, and 65° were designed, and the seat pan angle was maintained at 15°. A 23 g, 47 km/h pulse was used. The validity of the finite element model of the sled was verified by the comparison of ATD simulation and test results. ATD model was the test device for human occupant restraint for autonomous vehicles (THOR-AV) dummy model and HBM was the total human model for safety (THUMS) v6.1. The posture of the 2 models was adjusted to adapt to the 3 seat states. The lumbar response of THOR-AV and the mechanical and biomechanical data on L1-L5 vertebrae of THUMS were output, and the response relationship between THOR-AV and THUMS was descriptive statistically analyzed. Results: Both THOR-AV and THUMS were submarined in the 65° seatback angle case. With the change of seatback angle, the lumbar spine axial compression force (Fz) of THOR-AV and THUMS changed in the similar trend. The maximum Fz ratio of THOR-AV to THUMS at 25° and 45° seatback angle cases were 1.6 and 1.7. The flexion moment (My) and the time when the maximum My occurred in the 2 subjects were very different. In particular, the form of moment experienced by the L1 - L5 vertebrae of THUMS also changed. The changing trend of My measured by THOR-AV over time can reflect the changing trend of maximum stress of L1 and L2 of THUMS. Conclusion: The Fz of ATD and HBM presents a certain proportional relationship, and there is a mapping relationship between the 2 subjects on Fz. The mapping function can be further clarified by applying more pulses and adopting more seatback angles. It is difficult to map My directly because they are very different in ATD and HBM. The My of ATD and stress of HBM lumbar showed a similar change trend over time, and there may be a hidden mapping relationship.

Lumbar Spinal Loads and Lumbar Muscle Forces Evaluation with Various Lumbar Supports and Backrest Inclination Angles in Driving Posture.

Musculoskeletal computational analysis on muscle mechanical characteristics of drivers' lumbar vertebras and legs in different sitting postures

A Study on the Optimal Lumbar Support Against Driver's Spine

A Neuromuscular Human Body Model for Lumbar Injury Risk Analysis in a Vibration Loading Environment

Influence of lumbar support on tractor seat comfort based on body pressure distribution

A numerical investigation of factors affecting lumbar spine injuries in frontal crashes

Research of injury mapping relationship of lumbar spine in reclined occupants between anthropomorphic test devices and human body model

Kinematic patterns in performing trunk flexion tasks influenced by various mechanical optimization targets: A simulation study

Lumbar and neck injuries of occupants in different reclining postures

Influence of muscle activation on lumbar injury under a specific +Gz load

Seat inclination, use of lumbar support and low-back pain of taxi drivers

Analysis of lumbar spine loading during walking in patients with chronic low back pain and healthy controls: An OpenSim-Based study

Prediction of the biomechanical behaviour of the lumbar spine under multi-axis whole-body vibration using a whole-body finite element model

Research of Driving Safety Based on Human Body Biological Response

Study on the biodynamic characteristics and internal vibration behaviors of a seated human body under biomechanical characteristics

Risk assessment study on the impact of sitting posture on lumbar vibration injury based on finite element method and neural network

Optimal lumbar support prediction using intereface pressure

A three-dimensional motion model of loads on the lumbar spine: II. Model validation

A Statistical Method for Predicting Automobile Driving Posture

Human Lumbar Spine Injury Risk in Dynamic Combined Compression and Flexion Loading

A Study on Driver Posture Adjustment During Longtime Driving