Abstract:Purpose: To judge the injury mode and injury severity of the real human body through the measured values of anthropomorphic test devices (ATD) injury indices, the mapping relationship of lumbar injury between ATD and human body model (HBM) was explored. Methods: Through the ATD model and HBM simulation, the mapping relationship of lumbar injury between the 2 subjects was explored. The sled environment consisted of a semi-rigid seat with an adjustable seatback angle and a 3-point seat belt system with a seatback-mounted D-ring. Three seatback recline states of 25°, 45°, and 65° were designed, and the seat pan angle was maintained at 15°. A 23 g, 47 km/h pulse was used. The validity of the finite element model of the sled was verified by the comparison of ATD simulation and test results. ATD model was the test device for human occupant restraint for autonomous vehicles (THOR-AV) dummy model and HBM was the total human model for safety (THUMS) v6.1. The posture of the 2 models was adjusted to adapt to the 3 seat states. The lumbar response of THOR-AV and the mechanical and biomechanical data on L1-L5 vertebrae of THUMS were output, and the response relationship between THOR-AV and THUMS was descriptive statistically analyzed. Results: Both THOR-AV and THUMS were submarined in the 65° seatback angle case. With the change of seatback angle, the lumbar spine axial compression force (Fz) of THOR-AV and THUMS changed in the similar trend. The maximum Fz ratio of THOR-AV to THUMS at 25° and 45° seatback angle cases were 1.6 and 1.7. The flexion moment (My) and the time when the maximum My occurred in the 2 subjects were very different. In particular, the form of moment experienced by the L1 - L5 vertebrae of THUMS also changed. The changing trend of My measured by THOR-AV over time can reflect the changing trend of maximum stress of L1 and L2 of THUMS. Conclusion: The Fz of ATD and HBM presents a certain proportional relationship, and there is a mapping relationship between the 2 subjects on Fz. The mapping function can be further clarified by applying more pulses and adopting more seatback angles. It is difficult to map My directly because they are very different in ATD and HBM. The My of ATD and stress of HBM lumbar showed a similar change trend over time, and there may be a hidden mapping relationship.

A Study on the Optimal Lumbar Support Against Driver's Spine

Optimal lumbar support prediction using intereface pressure

Methodology and Cohort Profile for the Hangzhou Lumbar Spine Study: a Study Focusing on Back Health in a Chinese Population.

Influence of lumbar support on tractor seat comfort based on body pressure distribution

A Study on Objective and Subjective Evaluations for Ride Comfort of Vehicle Seats

A Study on Driver Posture Adjustment During Longtime Driving

A numerical investigation of factors affecting lumbar spine injuries in frontal crashes

Investigation into the Compressive Stress on Lumbar Spine among Tractor Drivers during different Ride Conditions

A body-shaped lumbar-sacral support for improving car-seat comfort

Effects of backrest design on biomechanics and comfort during seated work

The Effects of Backward Adjustable Thoracic Support in Wheelchair on Spinal Curvature and Back Muscle Activation for Elderly People

Lumbar and neck injuries of occupants in different reclining postures

Musculoskeletal computational analysis on muscle mechanical characteristics of drivers' lumbar vertebras and legs in different sitting postures

Kinematic patterns in performing trunk flexion tasks influenced by various mechanical optimization targets: A simulation study

Developing a heuristic relationship to predict the spinal injury during vertical impact for autonomous vehicle and bio environment

Human Lumbar Spine Injury Risk in Dynamic Combined Compression and Flexion Loading

Effects of backrest density on lumbar load and comfort during seated work.

A Simulation Study on the Efficacy of Advanced Belt Restraints to Mitigate the Effects of Obesity for Rear-Seat Occupant Protection in Frontal Crashes

Failure Tolerance of the Human Lumbar Spine in Combined Compression and Flexion Loading

Research of injury mapping relationship of lumbar spine in reclined occupants between anthropomorphic test devices and human body model

Finite Element Investigation of the Effects of the Low-Frequency Vibration Generated by Vehicle Driving on the Human Lumbar Mechanical Properties