Abstract:Co-pyrolysis corn stalk (CS) and high-density polyethylene (HDPE) is an effective method to mitigate environmental pollution and reuse the problematic plastic to produce valuable energy. The devolatilization kinetics and the evolution of gaseous species during co-pyrolysis were investigated via TG-FTIR-MS. Moreover, the possible interactions of CS and HDPE were explored. The co-pyrolysis process of CS-HDPE blends was found to be divided into two decomposition stages. The first stage (150-400 degrees C) was mainly associated with the decomposition of CS. The second stage (400-515 degrees C) was the result of combinations of the thermal degradations of CS and HDPE, with the degradation of HDPE contributing the most. Co-pyrolysis CS with HDPE could delay the decomposition of HDPE. In addition, the difference between experimental and theoretical weight loss (Delta W) was found to be less than zero when the percentage of CS was 80%. Furthermore, the average of the experimental activation energy was lower than that of the theoretical value for 80% CS. Thus, the positive synergy was strongest when the CS content was 80%, based on the thermal decomposition behavior and the activation energy. However, the blending ratio of CS-HDPE had little effect on the major categories of gaseous products during co-pyrolysis. Moreover, the interaction between CS and HDPE in the first stage (150-400 degrees C) could promote the release of H-2, CO/C2H4 and C3H6 in the blends with 80%, 60%, and 60% CS, respectively. Additionally, aliphatic hydrocarbons (CH4, C2H6, C3H8, C4H10, C4H8, C2H2) and oxygen-containing compounds (aldehydes, alcohols, ketones, acids) were suppressed by the interaction when the percentage of CS was less than 60%. In the second stage (400-850 degrees C), the yields of aliphatic hydrocarbons (CH4, C2H6, C3H8, C4H10, C4H8, C2H2, C4H6) were inhibited, independent of the content of CS in the blends. In addition, the production of H-2, CO/C2H4, and C3H6 was promoted when the percentage of CS was below 80%, 80%, and 60%, respectively.

Investigation on the Co-Pyrolysis of Bamboo Sawdust and Low-Density Polyethylene Via Online Photoionization Mass Spectrometry and Machine Learning Methods

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Co-pyrolysis of bamboo sawdust and plastic: Synergistic effects and kinetics

Online Photoionization Mass Spectrometric Evaluation of Catalytic Co-Pyrolysis of Cellulose and Polyethylene over HZSM-5.

Thermochemical behaviors, kinetics and bio-oils investigation during co-pyrolysis of biomass components and polyethylene based on simplex-lattice mixture design

Co-pyrolysis of Biomass and Polyethylene: Insights into Characteristics, Kinetic and Evolution Paths of the Reaction Process.

Investigation of kinetics, reaction mechanisms, thermodynamics, and synergetic effects in co-pyrolysis of wood sawdust and linear low-density polyethylene using the thermogravimetric approach

Co–pyrolysis of De–alkalized Lignin and Coconut Shell Via TG/DTG–FTIR and Machine Learning Methods: Pyrolysis Characteristics, Gas Products, and Thermo–kinetics

TG-FTIR-MS Study of Synergistic Effects During Co-Pyrolysis of Corn Stalk and High-Density Polyethylene (HDPE)

Investigating the interactions between lignocellulosic biomass and synthetic polymers during co-pyrolysis by simultaneous thermal and spectroscopic methods

Investigation and prediction of co-pyrolysis between oily sludge and high-density polyethylene via in-situ DRIFTS, TGA, and artificial neural network

Co-pyrolysis of corn stalk and high-density polyethylene with emphasis on the fibrous tissue difference on thermal behavior and kinetics

Co-pyrolytic interactions, kinetics and products of biomass pyrolysis coke and rapeseed cake: Machine learning, DAEM and 2D-COS analysis

Synergistic interactions and co-pyrolysis characteristics of lignocellulosic biomass components and plastic using a fast heating concentrating photothermal TGA system

Pyrolysis of Lignocellulosic Biomass: Molecular-level Insights with Online Ultrahigh-Resolution Mass Spectrometry

Co-pyrolysis of biomass and polyethylene: Mechanistic insights into functional group transformations on solid matrix

Co-pyrolysis Behaviors and Kinetics of Plastics–biomass Blends Through Thermogravimetric Analysis

Insight into synergistic effects of biomass-polypropylene co-pyrolysis using representative biomass constituents

Study on Biomass and Polymer Catalytic Co-Pyrolysis Product Characteristics Using Machine Learning and Shapley Additive Explanations (SHAP)

Combining pyrolysis–two-dimensional gas chromatography–time-of-flight mass spectrometry with hierarchical cluster analysis for rapid identification of pyrolytic interactions: Case study of co-pyrolysis of PVC and biomass components

Synergistic Effects and Kinetic Analysis in Co-Pyrolysis of Peanut Shells and Polypropylene