Abstract:Biomass is one of the promising alternative materials to solve the energy and environmental crisis. Fast pyrolysis is one of the most economical and commercially realizable technologies to convert biomass to useable fuels and chemicals. To improve the liquid products, co-pyrolysis with polypropylene (PP) over a mesoporous catalyst MCM-41 was studied in this paper. Thermogravimetry Fourier transform infrared spectroscopy (TG-FTIR) and pyrolysis gas chromatography mass spectrometry (Py-GC MS) were used as the main analysis methods to study the mass loss and detailed products of the co-pyrolysis. The mass loss, main functional groups, and identified products of pyrolysis of cellulose, PP, and their mixture were analyzed and discussed. All of the TG, FTIR, and Py-GC MS data show that there is no significant synergism between cellulose and PP when simply mixing them, although the C/H-eff of the mixture increases from 0 to 1.3. However, the addition of MCM-41 bring significant synergism. The TG and differential thermogravimetry (DTG) data show that the co-pyrolysis with MCM-41 shifts the decomposition of PP to a lower temperature, which provides more overlap between cellulose and PP in the range of 300-400 degrees C. According to the FTIR spectra, CO, CO2, and carbonyl are also produced in the peak for pyrolysis of PP for the mixture together with MCM-41, which indicates the intermolecular synergetic reaction. Furthermore, the results from Py-GC MS show that olefins (43.9%), oxygenated compounds (24.8%, mainly alcohols), and aromatics (17.8%) are the main products of co-pyrolysis of cellulose and PP in the presence of MCM-41, while oxygenated compounds (82.2%, mainly saccharides), olefins (4.7%), and aromatics (1.1%) will be the main products without the catalyst. Olefins and alcohols are Much more than the calculated value, which is the main result of synergism. Alcohols are mainly produced from the radical from the cracking of PP combined with the hydroxyl radical produced from decomposition of cellulose. Olefins are produced from the interaction reaction (carbenium ion reaction and beta-scission) between the primary products of cellulose and the hydrocarbon pool reaction of primary products of cellulose and PP. The results of this study enhance the understanding of co-pyrolysis of cellulose and PP in the presence of MCM-41 and provide the possible pathway of modifying the special pyrolysis products in catalytic pyrolysis of biomass with polymers.

Combining pyrolysis–two-dimensional gas chromatography–time-of-flight mass spectrometry with hierarchical cluster analysis for rapid identification of pyrolytic interactions: Case study of co-pyrolysis of PVC and biomass components

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Synergistic interactions and co-pyrolysis characteristics of lignocellulosic biomass components and plastic using a fast heating concentrating photothermal TGA system

Investigating the interactions between lignocellulosic biomass and synthetic polymers during co-pyrolysis by simultaneous thermal and spectroscopic methods

Online Photoionization Mass Spectrometric Evaluation of Catalytic Co-Pyrolysis of Cellulose and Polyethylene over HZSM-5.

Selective recovery of pyrolyzates of biodegradable (PLA, PHBH) and common plastics (HDPE, PP, PS) during co-pyrolysis under slow heating

Mechanism study on pyrolysis interaction between cellulose, hemicellulose, and lignin based on photoionization time-of-flight mass spectrometer (PI-TOF-MS) analysis

Co-pyrolysis of pinewood and HDPE: pyrolysis characteristics and kinetic behaviors study

Co-pyrolysis of biomass and polyethylene: Mechanistic insights into functional group transformations on solid matrix

Thermochemical behaviors, kinetics and bio-oils investigation during co-pyrolysis of biomass components and polyethylene based on simplex-lattice mixture design

Synergetic Effect of Co-pyrolysis of Cellulose and Polypropylene over an All-Silica Mesoporous Catalyst MCM-41 Using Thermogravimetry–Fourier Transform Infrared Spectroscopy and Pyrolysis–Gas Chromatography–Mass Spectrometry

Kinetic and thermodynamic analyses of co-pyrolysis of pine wood and polyethylene plastic based on Fraser-Suzuki deconvolution procedure

Fingerprinting and identification of isolated plastic polymers with pyrolysis comprehensive two-dimensional gas chromatography and flame ionization detection

Thermal behavior, synergistic effect and thermodynamic parameter evaluations of biomass/plastics co–pyrolysis in a concentrating photothermal TGA

Co-pyrolysis of corn stalk and high-density polyethylene with emphasis on the fibrous tissue difference on thermal behavior and kinetics

Co-pyrolysis behaviors of low-rank coal and polystyrene with in-situ pyrolysis time-of-flight mass spectrometry

Thermal and kinetic behaviors of corn stover and polyethylene in catalytic co-pyrolysis

Co-pyrolysis Behaviors and Kinetics of Plastics–biomass Blends Through Thermogravimetric Analysis

Quantifying the Sources of Synergistic Effects in Co-Pyrolysis of Pinewood and Polystyrene

Synergistic Interaction for Catalytic Co-Pyrolysis of Municipal Paper and Polyethylene Terephthalate Wastes Coupling with Deep Learning Methodology

Towards enhanced understanding of synergistic effects in co-pyrolysis of pinewood and polycarbonate