Abstract:In the current investigation, micro-arc oxidation (MAO) ceramic coatings on aluminum are galvanostatically synthesized at various processing stages in an alkaline silicate system. The resultant coatings are systematically investigated in terms of the following respects: The working voltage and surface sparking evolution over the studied course of MAO are recorded by the signal acquisition system and the real-time imaging, respectively; the phase composition, the surface morphology, and the polished cross-section of the coatings are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) assisted with an energy-dispersive X-ray spectrometer (EDS), respectively. In particular, with the help of a low-rate increase in working voltage, the evolution of the sparks, the energy consumption, and the microstructure development of aluminum in alkaline silicate electrolyte by pre-anodizing are systematically investigated. The results show that the pre-anodized film can accelerate the evolution process of MAO spark and shorten the reaction process in the early stage of MAO reaction, reducing energy consumption and improving the corrosion resistance of the MAO coating. The γ-Al2O3 phase content after pre-anodized is significantly increased in MAO coatings. In particular, the thicker the pre-anodized film (beyond 8 μm) was broken down and fragmentation thinning in the early stage of the MAO process with the presence of micro discharges. This is due to the fact that the electron transition will be released by the emission of radiative recombination and reveals obvious galvanoluminescence (GL) behavior on the surface of the pre-anodized film. Further, based on the present MAO coating microstructure, a model of coating growth after pre-anodized that evolves over time is proposed.

Effect of Microwave Field on Microstructure and Battery Performance of Al-Mg-Sn-Ga Anode Material

Microwave-assisted smelting to improve the corrosion and discharge performance of Al-anodes in Al-air batteries

Effect of microwave melting and subsequent rolling on the corrosion behavior and electrochemical properties of an aluminum anode using response surface methodology

Enhanced Electrochemical Performance of Mg2ni Alloy Prepared by Rapid Quenching in Magnetic Field

Grain Refining Effect of Magnetic Field on Mg2ni0.8mn0.2 Hydrogen Storage Alloys During Rapid Quenching

The Effect of Annealing on Electrochemical Performances of an Al–Sn–Ga–Mg Alloy as an Anode for Al–air Batteries in Alkaline Electrolytes

Effect of Annealing Process on Anode Discharge Performance of Aluminum-Air Batteries

Enhancing the Electrochemical Performance of Al-Mg-Sn-Ga Alloy Anode for Al-Air Battery by Solution Treatment

Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content

Effect of heat treatment on the microwave electromagnetic properties of flaky Fe-Si-Al magnetic powders

Electrochemical corrosion behavior of Mg-Al-Sn alloys with different morphologies of β-Mg 17 Al 12 phase as the anodes for Mg-air batteries

The effects of mechanical grinding on the hydrogen storage properties of MlNi4.7Al0.3 alloy

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

Micro-alloyed Mg–Al–Sn anode with refined dendrites used for Mg-air battery

Influence of Annealing Treatment on Microstructure and Cycling Stability of La-Rich Ml(Nicomnal)(5) Alloy Electrode for Ni/Mh Batteries

Effect of microwave melting on the microstructure and mechanical properties of Al-8.5Si-0.4Mg-0.7Cu alloy

Effect of Electrical Parameters on the Microstructure and Corrosion Resistance of Anodized Film of Mg-1Zn-1Gd Alloy Based on Orthogonal Experiment Method

Tailoring the electrochemical behavior and discharge performance of Mg–Al–Ca–Mn anodes for Mg-air batteries by different extrusion ratios

Microstructure and discharge performance of Mg–6Al and Mg–6Al-0.5Er alloys

The influence of Sn content on the electrochemical performance and discharge characteristics of Al-0.2Mg-0.02In-xSn-0.02Bi alloy anodes in aluminum-air batteries

Effect of Pre-Anodized Film on Micro-Arc Oxidation Process of 6063 Aluminum Alloy