Abstract:The utilization of T-junction microchannels with different lengths of branches is considered as the preferred method for asymmetric splitting to generate microdroplets with various sizes. In this study, a T-junction microfluidic chip with different-length branches is designed and an experimental platform is set up to visualize droplet asymmetric splitting in the chip, with a focus on elucidating microfluidic droplet asymmetric splitting behaviors. Through detailed analysis of the interface evolution and changing of the characteristic interface morphological parameters during the splitting process, the splitting flow patterns are clearly recognized and the underlying hydrodynamic mechanisms are revealed. Moreover, the influencing factors and their regulation rules on the asymmetric splitting volume ratios are also exposed. The results indicate that there are four types of flow patterns during droplet asymmetric splitting, i.e., splitting with obstruction and tunnel (SOT), splitting with tunnels and consequent droplets flowing in the opposite direction (ST-O), splitting with tunnels and consequent droplets flowing in the same direction (ST-S), and no splitting (NOS). A phase diagram of droplet splitting flow patterns is given. With the increasing initial droplet length for a given Capillary number, the splitting flow pattern experiences a transition from the NOS to the SOT through the ST-S and the ST-O. The splitting process comprises three distinct stages: the entering stage, the squeezing and splitting stage, and the post-splitting stage. During the squeezing and splitting stage, the competition of upstream continuous phase squeezing and interfacial tension causes asymmetric splitting by uneven shrinkage of the droplet neck. Additionally, it is found that the droplet final splitting volume ratio ( V l / V s ) increases with droplet length in the SOT flow pattern, while it decreases with droplet length in the ST-O and ST-S flow patterns. Importantly, the final V l / V s of the SOT pattern remains similar with increasing Ca for the same droplet length. However, the final V l / V s of the ST-O and ST-S pattern decreases with increasing Ca .

Fragmentation of Asymmetric Liquid Filaments and Formation of Satellite Droplets in a Microchannel

The Formation of Satellite Droplets in Micro-Devices Due to the Rupture of Neck Filament

Dynamics of Droplet Formation and Mechanisms of Satellite Droplet Formation in T-junction Microchannel

Satellite Droplet Formation and Its Inertial Separation in Integrated Microchannels

Breakup Dynamics of Elastic Droplet and Stretching of Polymeric Filament in a T-junction

Formation of Viscoelastic Droplets in Asymmetrical Parallel Microchannels

Formation of viscoelastic droplets in symmetrical parallelized microchannels

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Shear-induced Tail Breakup of Droplets (bubbles) Flowing in a Straight Microfluidic Channel

Formation of uniform plugs and monodispersed droplets for viscoelastic fluid flow in microchannels

Study on the mechanism of droplet formation in T-junction microchannel

Formation of microthreads and satellite bubbles influenced by surfactants within a microfluidic T-junction

Deformation and Breakup of Droplets in a Double T-junction Microdisperser with Double Input of the Continuous Phase

The Breakup Dynamics and Mechanism of Viscous Droplets in Y-shaped Microchannels

Breakup Dynamics of Droplets in Symmetric Y-Junction Microchannels

Droplet breakup driven by shear thinning solutions in a microfluidic T-Junction

Breakup Dynamics of Semi-dilute Polymer Solutions in a Microfluidic Flow-focusing Device

Droplet Formation in a Microfluidic T-Junction Device

Fragmentation of Inviscid Liquid and Destination of Satellite Droplets

Investigation on asymmetric splitting behavior of droplets through T-junction with different-length branches

Breaking one into three: surface-tension-driven droplet breakup in T-junctions