Abstract:In this communication, a single-layer, wideband, differential-fed filtering antenna with high selectivity is proposed. The developed filtering antenna possesses a simple structure and consists of a square patch, a square substrate integrated waveguide (SIW) cavity, a pair of symbiotic stepped impedance resonators (SSIRs), and a pair of complementary split ring resonators (CSRRs). The SIW cavity formed with sparse metalized posts is embedded in the square patch, and the impedance bandwidth can be broadened by merging the TM10 mode of the square patch, excited by the electromagnetic energy escaping from the sparse posts, with the TE210 mode in the SIW cavity through differential excitation. The SSIRs are connected with both radiating edges of the square patch. And two extra in-band resonances together with an upper-edge radiation null are simultaneously generated, so the impedance bandwidth and the frequency selectivity at the higher stopband can be significantly improved. The CSRRs, surrounding the differential excitation ports, are etched into the bottom surface of the SIW cavity, and a lower-edge radiation null is produced to further sharpen the roll-off rate. By adjusting the geometrical parameters of the SSIRs and CSRRs, the positions of the two radiation nulls can be independently controlled. For verifying the design method, a prototype of the developed single-layer filtering antenna has been fabricated and tested. The measurement results are well consistent with the simulated values, indicating good performance with a large −10 dB fractional impedance bandwidth of 21.2%, a peak realized gain of 9.3 dBi, two out-of-band rejection levels of more than 26 dB, and very high selectivity.

Self-Packaged Dual-Band Filter with High Selectivity and Low Radiation Loss

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

A Dual-Band Filter Using Stepped-Impedance Resonator (SIR) Embedded into Substrate Integrated Waveguide (SIW)

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Novel Multifunctional Reconfigurable Wideband Frequency-Selective Filter/Shielding With Independently Controlled Operating Modes

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

An mmWave dual-band integrated substrate gap waveguide single cavity filter with frequency selectivity

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

A Single-Layer Wideband Differential-Fed Filtering Antenna With High Selectivity

High-order Dual-Band Superconducting Filter with Independently Controllable Passbands and Wide Stopband

A compact SIW dual-functional design with integrated filter and self-diplexing antenna

A Filtering Antenna With High Frequency Selectivity Using Stacked Dual-Slotted Substrate Integrated Cavities

Compact, Low Loss, and High Power Handling HTS Dual-Mode Double-Strip Resonator Filter With New Feeding Structure

A Miniaturized Ultrawideband Dual-Bandpass Frequency-Selective Surface With High Selectivity