Abstract:Pumped storage power is the most mature and cleanest energy in the world, which is universally used in energy recovery fields. As the pumped storage units operate at part-load conditions, typical unstable flow phenomena are universally observed. Guaranteeing the operation stability of the unit is being increasing significant. Since much attention has been paid to the unstable flow characteristic in the hump region, the interaction between the unstable flow and hump characteristic is seldom involved. In present research, comprehensive analysis is systematically conducted to explore unstable flow and its interaction with the hump characteristic in a pump-turbine operated at pump mode. Three typical models, corresponding to the test model, small lean angle model (lean angle theta = 2 degrees) and medium lean angle model (lean angle theta = 10 degrees) representing different flow conditions, i.e., "hump peak", "hump valley" and "stable condition" respectively, are selected for analysis. First, characteristic curves predicted by a modified shear stress transport k-omega partially averaged Navier-Stokes model show good agreements with the experiment data. Then, comprehensive discussions are performed in the blade passage of runner and guide vane. In the runner blade passage, the scale of flow separation near the suction side of the blade increases with increment of the lean angle. In the guide vane, although rotating stall is observed in three models, its scale and intensity are largest under the "hump peak" condition, and alleviated under the "hump valley" and "stable condition". After frequency and its dynamics analysis, it is found that one dominant frequency of 0.088f(n) is induced by the rotating stall evolution. Moreover, as the rotating stall is alleviated under the "stable condition", the dominant frequency captured by the proper orthogonal decomposition (POD) method is transferred to 3f(n), and the hump is also alleviated.

Numerical Analysis on the Modal Characteristics of a Pumped Storage Unit Runner in Cavitating Flow

Analyses of the spatial and temporal features of the blade pressure‐side cavitation in a pump‐turbine runner in the pump mode

Distribution Features of Flow Patterns and Pressure Pulsations of Pump-Turbine in Five Operating Modes on the Four-Quadrant Plane

Pressure pulsation analysis of runner and draft tube of pump turbine under different working conditions

Analysis of Francis Pump-Turbine Runner Cavitation Flows in Pump Mode

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Numerical Simulation of the Transient Flow in a Pump-Turbine During the Load Rejection Process With Special Emphasis on the Cavitation Effect

Numerical Investigation on the Unstable Flow and Its Interaction with the Hump Characteristic in a Pump Turbine at Pump Mode

Investigation on Fluid Added Mass Effect in the Modal Response of a Pump-Turbine Runner

Analysis of Flow and Runner Dynamic Response Characteristics under Pump Conditions of Variable-Speed Pump Turbine

Dynamic analysis of the pump system based on MOC–CFD coupled method

Study on the Influence of Gap Water Body on the Modal Characteristics of Pump Turbine Runner.

Comparative Study on Numerical Calculation of Modal Characteristics of Pump-Turbine Shaft System

Numerical Study on the Flow and Structural Characteristics of a Large High Head Prototype Pump-Turbine under Different Operating Conditions

Numerical Investigation of the Hump Characteristic of A Pump-Turbine Based on an Improved Cavitation Model

Research and optimization of performances of a pump turbine in pump mode

Numerical Theory and Method on the Modal Behavior of a Pump-Turbine Rotor System Considering Gyro-Effect and Added Mass Effect

Numerical Study of the Natural Frequency and Mode Shape of Prototype Francis Turbine Runner

Dynamic Response of a Pump-Turbine Runner During Turbine's Mode Starting Up

Cavitation pressure fluctuation characteristics of a prototype pump-turbine analysed by using CFD

Analysis of Flow Characteristics in Pumped Storage Unit During Start-Up in Turbine Mode