Abstract:A newly synthesized functional additive of MgPFPAA with antihydrolysis property is first used to stabilize the electrode/electrolyte interfaces for all‐solid‐state lithium batteries. Results indicate a stable solid electrolyte interface film with gradient distribution of LiF and LixMg is generated with the assistance of MgPFPAA, therefore enabling an ultrathin composite solid electrolyte to boost the rate and cycle performances of the assembled cell. Composite solid‐state electrolyte (CSE) incorporated with fluorine‐containing functional additives usually endows the assembled cell with improved electrochemical performance by forming stable electrode/electrolyte interfaces. However, most of fluorine‐containing additives are prone to hydrolysis, which is not suitable for the large‐scale preparation of CSEs. In this work, an antihydrolysis and fluorine‐containing additive of magnesium 2,3,4,5,6‐pentafluorophenylacetate (MgPFPAA) is successfully synthesized and then used to regulate the properties of the electrode/electrolyte interfaces of the all‐solid‐state lithium batteries (ASSLBs). The antihydrolysis property of MgPFPAA facilitates the large‐scale preparation of the ultrathin CSEs in atmospheric environment. Both theoretical calculations and experimental results indicate that MgPFPAA can effectively improve the composition and structure of the generated solid electrolyte interface film by providing rich F sources and Mg2+, thus leading to a stable CSE/Li interface. Furthermore, an ultrathin PEO/PVDF‐based CSE (≈30 μm) functionalized by this novel MgPFPAA additive enables the assembled LiFePO4‐based ASSLB with greatly enhanced electrochemical performances, with high discharge specific capacity of 93.7 mAh g−1 at 10 C and a high capacity retention of 74.9% after 1500 cycles at 5.0 C. Also, this MgPFPAA functionalized CSE can be compatible with the high‐areal‐capacity LiFePO4 and the high‐voltage LiNi0.8Co0.1Mn0.1O2 cathodes.

Phenylphosphonic acid as a grain-refinement additive for a stable lithium metal anode.

Triphenylphosphine Oxide as Highly Effective Electrolyte Additive for Graphite/NMC811 Lithium Ion Cells

The Practice of Rational Designs of Electrolyte Additives for Lithium Batteries

Unlocking the dissolution mechanism of phosphorus anode for lithium-ion batteries

Ameliorating Phosphonic-Based Nonflammable Electrolytes Towards Safe and Stable Lithium Metal Batteries

Stable Non‐flammable Phosphate Electrolyte for Lithium Metal Batteries via Solvation Regulation by the Additive

A Phosphorous Additive for Lithium-Ion Batteries

Solid Electrolyte Interphase Structure Regulated by Functional Electrolyte Additive for Enhancing Li Metal Anode Performance

Phosphonium Bromides Regulating Solid Electrolyte Interphase Components and Optimizing Solvation Sheath Structure for Suppressing Lithium Dendrite Growth

Synergistic effect of lithium salt and trimethyl phosphate for enhanced interface stability in solid-state lithium metal batteries

Nanoporous Adsorption Effect on Alteration of the Li + Diffusion Pathway by a Highly Ordered Porous Electrolyte Additive for High-Rate All-Solid-State Lithium Metal Batteries.

Coupling Alloyed Lean Lithium Anodes with PIM-1-blended PEO Electrolytes Synergistically Promotes Reversible Li Stripping/deposition Reactions for All-Solid-state Lithium-Metal Batteries

Triphenyl Phosphite As an Electrolyte Additive to Improve the Cyclic Stability of Lithium-Rich Layered Oxide Cathode for Lithium-Ion Batteries

A Thin Composite Polymer Electrolyte Functionalized by a Novel Antihydrolysis Additive to Enable All‐Solid‐State Lithium Battery with Excellent Rate and Cycle Performance

Achieving Stable Lithium Metal Anodes Via the Synergistic of Electrostatic Shielding and High Li+ Flux Inorganic Interphase

Diethyl phenylphosphonite contributing to solid electrolyte interphase and cathode electrolyte interphase for lithium metal batteries

Pseudo-concentrated Electrolytes for Lithium Metal Batteries

Enhanced Stability of Li Metal Anodes by Synergetic Control of Nucleation and the Solid Electrolyte Interphase

In situ polymerization of 1,3-dioxolane and formation of fluorine/boron-rich interfaces enabled by film-forming additives for long-life lithium metal batteries

Solubility-mediated sustained release enabling nitrate additive in carbonate electrolytes for stable lithium metal anode

Organic Nitrate Additive for High‐Rate and Large‐Capacity Lithium Metal Anode in Carbonate Electrolyte