Abstract:A supramolecular polymer, poly(N-acryloyl glycinamide) (PNAGA), with a bisamide group on each side of the chain forming multiple amide-hydrogen bonds was synthesized in this work as a binder for silicon (Si)-based anodes. This supramolecular polymer binder with improved mechanical properties presents good interfacial adhesion with Si particles forming hydrogen bonds and enhances the adhesive strength between the electrode material film and the copper current collector. Benefiting from the highly stable inter- and intramolecular multiple amide-hydrogen bonds of the PNAGA binder, the electrode structure maintains integrity and a stable solid electrolyte interphase (SEI) layer is formed on the surface of Si particles. The effect of different binders on the composition of the SEI film was also investigated by X-photoelectron spectroscopy (XPS) characterization. In comparison with polyacrylamide (PAM), which has a similar structure to PNAGA, and the traditional sodium alginate (SA) binder, the Si electrode containing the PNAGA binder shows improved electrochemical performance. The capacity retention is 84% after 100 cycles at 420 mA g–1, and the capacity remains at 1942.6 mAh g–1 after 400 cycles at 1260 mA g–1. Even with a mass loading of 1.2 mg cm–2 Si, the electrode with the PNAGA binder exhibits high initial areal capacity (2.64 mAh cm–2) and good cycling performance (81% capacity retention after 50 cycles). Moreover, the application of the PNAGA binder also brings a stable cycle performance to the commercial Si-graphite (SiC) anode material.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04501?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04501</a>.SEM image and XRD pattern of the commercial SiC composite; 1H NMR spectrum of NAGA; TEM images and XRD pattern of SiNPs; photographs of the PNAGA hydrogel and powder; Vickers hardness test results of different binder films; photographs of electrodes with different mass loadings; electrochemical stability of binders; CV curves of electrodes with different binders; and XPS spectra of the cycled electrode (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04501/suppl_file/am1c04501_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Investigation of Effective Bonding Between Varied Binders and Si Anode with Different Particle Sizes

Investigation of Xanthan Gum and Carboxymethyl Cellulose Binders for the Silicon Anode of Lithium-Ion Batteries

Novel alginate-based binders for silicon–graphite anodes in lithium-ion batteries: effect of binder chemistry on the electrochemical performance

Revisit the Progress of Binders for a Silicon-Based Anode from the Perspective of Designed Binder Structure and Special Sized Silicon Nanoparticles

Dispersion Homogeneity of Silicon Anode Slurries with Various Binders for Li-Ion Battery Anode Coating

Deconvoluting Slurry Rheology from Binder Performance in Si-Based Anodes

(Invited) Binder Investigation for Silicon Electrode of Lithium-Ion Batteries

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

Natural Sesbania Gum As an Efficient Biopolymer Binder for High-Performance Si-based Anodes in Lithium-Ion Batteries

An Easy-to-prepare Flexible 3D Network Aqueous Binder with Gradient Hydrogen Bonding for High-Performance Silicon Anodes

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

A carboxymethyl vegetable gum as a robust water soluble binder for silicon anodes in lithium-ion batteries

Effect of binders on performance of Si/C composite as anode for Li-ion batteries

The Effect of Binder on the Electrochemical Property of Silicon/carbon Anode

Multivalent Amide-Hydrogen-Bond Supramolecular Binder Enhances the Cyclic Stability of Silicon-Based Anodes for Lithium-Ion Batteries

Regulating Grafting Density to Realize High‐Areal‐Capacity Silicon Submicroparticle Anodes Under Ultralow Binder Content

Investigation of the Different Structures of Xanthan Gum on the Performance of Silicon Anodes in Lithium-ion batteries

Improving the Electrochemical Property of Silicon Anodes through Hydrogen-Bonding Cross-Linked Thiourea-Based Polymeric Binders

Investigation on Psyllium Gum as a Bio‐Based Binder for Silicon Anode in Lithium‐Ion Batteries

Preparation of an Amorphous Cross-Linked Binder for Silicon Anodes

Effect of silicone segment and imidization of polyimide-based binder on the electrochemical performances of high silicon content anode for lithium-ion batteries