Abstract:Binders play a crucial role in the development of silicon (Si) anodes for lithium-ion batteries with high specific energy. The large volume change of Si (∼300%) during repeated discharge and charge processes causes the destruction and separation of electrode materials from the copper (Cu) current collector and ultimately results in poor cycling performance. In the present study, we design and prepare hydrogen-bonding cross-linked thiourea-based polymeric binders (denoted CMC-co-SN) in consideration of their excellent binding interaction with the Cu current collector and low cost as well. The CMC-co-SN binders are formed through in situ thermopolymerization of chain-type carboxymethylcellulose sodium (CMC) with thiourea (SN) in the drying process of Si electrode disks. A tight and physical interlocked layer between the CMC-co-SN binder and Cu current collector is derived from a dendritic nonstoichiometric copper sulfide (CuxS) layer on the interface and enhances the binding of electrode materials with the Cu current collector. When applying the CMC-co-SN binders to micro- (∼3 μm) (μSi) and nano- (∼50 nm) (nSi) Si particles, the Si anodes exhibit high initial Coulomb efficiency (91.5% for μSi and 83.2% for nSi) and excellent cyclability (1121 mA h g–1 for μSi after 140 cycles and 1083 mA h g–1 for nSi after 300 cycles). The results demonstrate that the CMC-co-SN binders together with a physical interlocked layer have significantly improved the electrochemical performance of Si anodes through strong binding forces with the current collector to maintain electrode integrity and avoid electric contact loss.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18743?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18743</a>.FTIR spectra of binders and electrode disks, peeling test of binders with Cu foils, SEM images of active materials and electrode disks before and after cycling, supplementary electrochemical performance, and XPS spectra of the cycled electrode disks (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18743/suppl_file/am0c18743_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the electrochemical performance challenges faced by silicon (Si) as an anode material for lithium - ion batteries. Specifically, silicon has an extremely large volume change (about 300%) during the charging and discharging process, which leads to the destruction and separation between the electrode material and the copper current collector, and ultimately causes the problem of poor cycling performance. The paper proposes a method to improve the electrochemical performance of the silicon anode by using a thiourea - based polymer binder cross - linked by hydrogen bonds (denoted as CMC - co - SN). This binder significantly improves the electrochemical performance of the silicon anode by enhancing the binding force with the copper current collector, maintaining the integrity of the electrode material, and avoiding electrical contact loss. The key points of the paper include: 1. **Problem background**: Silicon is considered a promising anode material for future lithium - ion batteries due to its high theoretical specific capacity, low working voltage, and abundant reserves. However, due to the large volume change of silicon during the lithiation/delithiation process, electrode pulverization, electrical contact loss, and continuous formation/change of the solid - electrolyte interface layer (SEI) occur. These factors deteriorate the cycling stability of the silicon - based anode and increase the initial irreversible capacity, hindering its commercial application. 2. **Solution**: A thiourea - based polymer binder cross - linked by hydrogen bonds (CMC - co - SN) was designed and prepared. This binder is formed by the in - situ thermal polymerization reaction of sodium carboxymethyl cellulose (CMC) and thiourea (SN) during the drying process. A tight physical interlocking layer is formed between the CMC - co - SN binder and the copper current collector, which is derived from the dendritic non - stoichiometric copper sulfide (Cu_xS) layer at the interface, enhancing the binding between the electrode material and the copper current collector. 3. **Experimental results**: When the CMC - co - SN binder is applied to micron - sized (about 3μm) and nano - sized (about 50nm) silicon particles, the silicon anode exhibits a high initial Coulombic efficiency (91.5% for micron - silicon and 83.2% for nano - silicon) and excellent cycling stability (1121mAh/g for micron - silicon after 140 cycles and 1083mAh/g for nano - silicon after 300 cycles). In conclusion, this research solves the problem of poor cycling performance of silicon - based anodes in lithium - ion batteries caused by volume change by developing a new type of thiourea - based polymer binder cross - linked by hydrogen bonds, providing an effective method for improving the electrochemical performance of silicon - based anodes.

Improving the Electrochemical Property of Silicon Anodes through Hydrogen-Bonding Cross-Linked Thiourea-Based Polymeric Binders

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Improving the Performance of the SiO/C Anode by Employing theTriblock Copolymer Binder and Copper Nanowires

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

Modified Polyacrylonitrile Cross-Linked with Carboxymethyl Cellulose Constructing a Hydrogen Bonding Network for High-Performance Silicon Anodes

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

Multivalent Amide-Hydrogen-Bond Supramolecular Binder Enhances the Cyclic Stability of Silicon-Based Anodes for Lithium-Ion Batteries

A Robust Network Sodium Carboxymethyl Cellulose-Epichlorohydrin Binder for Silicon Anodes in Lithium-Ion Batteries

Multiple Network Binders via Dual Cross-Linking for Silicon Anodes of Lithium-Ion Batteries

Multifunctional Cross-Linking Composite Binder Enables the Stable Performance of Si-Based Anodes for High-Energy-Density Lithium-Ion Batteries

A Triple Crosslinked Binder with Hierarchical Stress Dissipation and High Ionic Conductivity for Advanced Silicon Anodes in Lithium-ion Batteries

A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon‐Based Lithium‐Ion Battery Anode

A Novel Tin-Bonded Silicon Anode for Lithium-Ion Batteries

Cross-linked multifunctional binder in situ tuning solid electrolyte interface for silicon anodes in lithium ion batteries

Constructing Robust Cross-Linked Binder Networks for Silicon Anodes with Improved Lithium Storage Performance

An Elastic Cross-Linked Binder for Silicon Anodes in Lithium-Ion Batteries with a High Mass Loading

High-Performance Carboxymethyl Cellulose Integrating Polydopamine Binder for Silicon Microparticle Anodes in Lithium-Ion Batteries

Cross-Linkable Binders for Si Anodes in High-Energy-Density Lithium-Ion Batteries

(Invited) Binder Investigation for Silicon Electrode of Lithium-Ion Batteries

Improved performance in micron-sized silicon anodes by in situ polymerization of acrylic acid-based slurry