Abstract:Titanium matrix composites reinforced with titanium boride (TiB) and titanium carbide (TiC) were fabricated in situ via selective laser melting (SLM). Varying contents of boron carbide (B4C) from 0 to 5 wt% were added to pure Ti to prepare blended powders for SLM. The influence of the B4C content on the printability, microstructure and mechanical properties of SLM-printed (TiB + TiC)/Ti composites was studied. The relative densities of all the fabricated composites were greater than 97.8 %; an increase in the B4C content resulted in a decrease in their relative density. The microstructure of the composites varied from a lath-shaped structure (0 wt%) to a dendritic structure (1 wt%) and to a cellular + dendritic structure (2–5 wt%), which was determined by the change of thermal convection within melt pools. Both the dendritic and cellular structures were arranged by coalescent clusters composed of TiB whiskers and TiC particles, while the clusters were formed through a self-joining behavior of the TiB whiskers that were mechanically locked with the TiC particles. The composites with the addition of 1 wt% B4C exhibited the highest ultimate tensile strength of 946 MPa, yield strength of 762 MPa and elastic modulus of 128 GPa, which were 62.4 %, 49.2 % and 15.3 % higher than those of the Ti matrix, respectively. The remarkable enhancement in the mechanical strengths was attributed to the synergistic effect of dispersion strengthening and grain refinement strengthening. The (TiB + TiC)/Ti composites fabricated in situ by SLM with an optimized material formulation not only ensured comparable mechanical properties to those of their counterparts manufactured by conventional processes but also demonstrated the potential in manufacturing complex and/or customized parts with design freedom for industrial applications.

Direct Laser Powder-Bed Fusion Additive Manufacturing of Complex-Shaped TiB2-B4C Composite with Ultra-Fine Eutectic Microstructure and Outstanding Mechanical Performances

Direct laser powder-bed fusion additive manufacturing of complex-shaped TiB 2 -B 4 C composite with ultra-fine eutectic microstructure and outstanding mechanical performances

Fabrication of Fully Dense Tial-Based Composite Sheets with A Novel Microlaminated Microstructure

New Insights into the Microstructural Evolution and Properties of (Tib+tic)/ti-6Al-4v Composite Via Laser Directed Energy Deposition Using B4C Nanoparticles

New insights into the microstructural evolution and properties of (TiB+TiC)/Ti–6Al–4V composite via laser directed energy deposition using B 4 C nanoparticles

Laser Powder Bed Fusion of an Ultrafine Microstructural In-Situ TiB2/Al Composite with Excellent Mechanical Properties and Thermal Stability at Elevated Temperatures

Microstructure and mechanical properties of (TiB+TiC)/Ti composites fabricated in situ via selective laser melting of Ti and B4C powders

In-situ preparation and formation of TiB/Ti-6Al-4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior

Formability, densification behavior and hierarchical grain structure of laser-directed energy deposition of TiB reinforced titanium matrix composites

In-situ synthesis of high strength and toughness TiN/Ti6Al4V sandwich composites by laser powder bed fusion under a nitrogen-containing atmosphere

Microstructure and mechanical properties of in-situ hybrid reinforced (TiB+TiC)/Ti composites prepared by laser powder bed fusion

Refined Microstructure and Ultrahigh Mechanical Strength of (tin + TiB)/Ti Composites in Situ Synthesized Via Laser Powder Bed Fusion

TiB Nano-Whiskers Reinforced Titanium Matrix Composites with Novel Nano-Reticulated Microstructure and High Performance Via Composite Powder by Selective Laser Melting

Additive Manufacturing of (tib+tic)/ti6al4v Composites with Tailored Network Reinforcement Architecture

Laser powder bed fusion additive manufacturing, microstructure evolution, and mechanical performance of carbon nanotube-decorated titanium alloy powders

Network formation and mechanical property of additive manufactured TiB/Ti composites

Microstructure Evolution and Mechanical Properties of Selective Laser Melted Bulk-Form Titanium Matrix Nanocomposites with Minor B4C Additions

Microstructural Evolution, Mechanical Properties and Tribological Behavior of B4C-Reinforced Ti in Situ Composites Produced by Laser Powder Bed Fusion.

B4C‒TiB2 composite with modified microstructure and enhanced properties from optimal size coupling of raw powders

Microstructure Evolution and Mechanical Property of B4C/Ti65 Composites Via Laser Directed Energy Deposition

Engineering fine grains, dislocations and precipitates for enhancing the strength of TiB 2 -modified CoCrFeMnNi high-entropy alloy using Laser Powder Bed Fusion