Surface Modification of Chrysocolla with EDTA-2Na and CuSO4 and Its Response to Xanthate Adsorption
Rong Peng,Haoxiang Wang,Zhicong Wei,Jianjun Fang,Xiaolin Zhang,Peilun Shen,Dianwen Liu
DOI: https://doi.org/10.1016/j.apt.2024.104423
IF: 4.969
2024-01-01
Advanced Powder Technology
Abstract:Chrysocolla is an important copper-oxide ore. However, because of the high surface hydrophilicity, and the small number of active sites, the effective flotation recovery of chrysocolla faces great challenges. In this study, ethylenediaminetetraacetic acid disodium (EDTA-2Na) and CuSO4 were used as surface modifiers for chrysocolla, and the effects of surface modification on the flotation behavior, xanthate adsorption characteristics, and hydrophobicity of the chrysocolla were systematically investigated using micro-flotation, field-emission secondary electron microscopy with energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, adsorption experiments, and contact angle measurements. Compared to direct flotation, the flotation recovery of chrysocolla after surface modification increased significantly from 25% to approximately 95%. During the modification process, neither EDTA-2Na nor SO42- was effectively adsorbed onto the surface of the chrysocolla. CuSO4 provided copper ions for to generate of stable copper-containing components on the surface of the chrysocolla, whereas EDTA-2Na acted as a modifier to promote the generation of copper-containing components on the surface of the chrysocolla. Surface modification increased the number and stability of copper-containing components on the chrysocolla surface. This promoted the effective adsorption of xanthate, improved the hydrophobicity of the mineral surface, and enhanced its flotation characteristics.