Abstract:A novel 3D Folded Structure (3D‐FS) with Negative Poisson's Ratio (NPR) is proposed in this paper. The 3D structure consists of two vertical star‐shaped structures connected by a rectangular thin‐walled square tube. The deformation mechanism and energy absorption properties are investigated by the experiment and simulation. An analytical model describing the two plateau stress phases is presented based on the experimental data. Numerical simulations are performed to analyze the influence of the structural geometry parameters on the plateau stress, energy absorption properties and NPR, and to establish the relationship between specific energy absorption and wall thickness ratio for the two plateau stress phases. A comparison of NPR and energy absorption is performed with the warp and woof periodic auxetic cellular structure (WWPACS). The results show that 3D‐FS has an obvious NPR effect and bistable performance under compressive loading. With the star re‐entrant angle increasing, the first plateau stress increases while the second plateau stress decreases, meanwhile the NPR effect and energy absorption capacity are enhanced. The double‐inclined wall angle has little effect on the plateau stress and energy absorption capacity, but has many effects on the NPR. The NPR effect is enhanced with the decreasing of double‐inclined wall angle. The NPR effect of 3D‐FS is more evident than that of WWPACS, and the maximum NPR is 1.14 times of WWPACS. The specific energy absorption (SEA) of 3D‐FS is 2.21 times larger than that of WWPACS when the compressive compression strain is 0.60. This article is protected by copyright. All rights reserved.

Plastic Behavior of Foam-Filled Negative Poisson’s Ratio Beams

Plastic Behavior of the Foam-Filled Sandwich Beam with Circular Tube Core under Transverse Loading

Plastic Behaviour of Foam-Filled X-shaped Core Sandwich Beam

Study on mechanical properties of an isotropic negative Poisson's ratio Voronoi foam and its foam-filled tube

Plastic Behavior of Metal Sandwich Beams with Foam-Filled Sinusoidal Corrugation

A novel method for preparing anisotropic negative Poisson's ratio composite foam with excellent structural stability and shape recovery property

Plastic behavior of slender circular metal foam-filled tubes under transverse loading

Large Deflection of Foam-Filled Y-shape Sandwich Beams under Lateral Loading

Dynamic Response of Foam-Filled Sandwich Beam with Circular Shape Core under Low-Velocity Impact

Plastic analysis of metal foam core sandwich beam transversely loaded by a flat punch: Combined local denting and overall deformation

Design optimization of foam-reinforced corrugated sandwich beams

Thermal Post-Buckling of Sandwich Beams with Functionally Graded Negative Poisson's Ratio Honeycomb Core

Crushing Behavior and Energy Absorption Performance of a Novel 3D Folded Structure with Negative Poisson's Ratio

A Design Framework for Negative Poisson’s Ratio Structure with Curved Beam Compliant Mechanism Unit Cells

Design and Quasi-Static Responses of a Hierarchical Negative Poisson’s Ratio Structure with Three Plateau Stages and Three-Step Deformation

Plastic Analysis of Multilayer Sandwich Beams with Metal Foam Cores

Energy Absorption by 3D-Printed Mesh Structures with a Negative Poisson's Ratio

Large-Deflection Bending of Clamped Metal Foam-Filled Rectangular Tubes

Large Deflections of Multilayer Sandwich Beams with Metal Foam Cores under Transverse Loading

A novel 3D impact energy absorption structure with negative Poisson’s ratio and its application in aircraft crashworthiness

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models