Abstract:In order to improve the efficiency of passing the isolated intersection where there were high traffic saturation and multiple priority requests for buses,a mix integer linear program (MILP) model integrated with intersection signal timing and bus speed was proposed.With the consideration that the bus speed could be conducted and adjusted,the bus speed adjustment and intersection signal phase duration optimization were regarded as variables,and the aim was to minimize the bus delay and stop times.The constraints were the cycle length and phase saturation.In the model,0-1 variable was adopted to express bus stop times and whether a bus can pass through in the arrival cycle.The results show that,with high traffic saturation of the intersection,the maximum adjustment of bus arrival time is ±8 seconds.Compared with the original signal timing scheme,the bus delay per person decreases by 14.35 s (27.71％),whilst bus stop times decrease by 1 (14.29％) based on "the bus speed optimization model".The bus delay per person decreases by 12.39 s (23.93％) and bus stop times decreases by 1 (14.29％)based on "the signal timing optimization model".The bus delay per person decreases by 40.68 s (78.56％) and bus stop times decreases by 3 (42.86％) based on the new model presented in this paper,which have gone beyond the sum of individual signal optimization and speed guidance.Furthermore,even if the signal timing and bus speed guidance are taken into consideration,the bus delay per person decreases by 17.29 s (33.39％) and bus stop times decreases by 1(14.29％)with the FCFS (first come first serve).Ideal bus signal priority effect can be achieved by increasing the adjustment quantity of the bus speed with high traffic saturation of intersection and limited signal timing adjustment.

Joint Optimization of Stop Design and Lane Assignment for Buses with Different Directions at a Signalized Intersection

Optimizing Vehicle and Pedestrian Trade-Off Using Signal Timing in Intersections with Center Transit Lanes

A bi-objective model for bus transit network and lane reservation integrated optimization

Intersection multi-objective optimization on signal setting and lane assignment

A Bi-Objective Decision Model and Method for the Integrated Optimization of Bus Line Planning and Lane Reservation

Simulation of Two-Lane Traffic Flow Considering the Combined Effect of Intersection and Bus Stop

A Multi-Stage Stochastic Optimization Approach to the Stop-Skipping and Bus Lane Reservation Schemes

Mixed Scheduling Strategy for High Frequency Bus Routes with Common Stops

Integrated Optimization of Transit Priority Operation at Isolated Intersections: A Person-Capacity-based Approach

Lane-based Optimization Model of Passive Bus Priority Control for Isolated Intersection

Optimal Control Model of Multiple Bus Signal Priority Requests for Isolated Intersection Based on Speed Guidance

Impact of Curbside Bus Stop Locations on Mixed Traffic Dynamics: a Bus Route Perspective

Optimal design of bus stops that are shared by multiple lines of buses

Bi-Level Programming Model for Dynamic Reversible Lane Assignment

Simultaneous Optimization of Passive Transit Priority Signals and Lane Allocation

Intersection traffic signal optimisation considering the impact of upstream curbside bus stops

Collaborative optimization of intersection signals and speed guidance for buses run on overlapping route segments under connected environment

Bus Signal Priority Strategy for Isolated Intersection with Far-side Bus Stop

Network-level Optimization of Bus Stop Placement in Urban Areas

Optimization of Bus Scheduling and Bus-Berth Matching at Curbside Stops under Connected Vehicle Environment

Increasing the Capacity of Signalized Intersections by Allocating Exit Lanes to Turning Movements