Abstract:Oversaturation has become a severe problem for urban intersections, especially the bottleneck intersections that cause queue spillover and network gridlock. Further improvement of oversaturated arterial traffic using traditional mitigation strategies, which aim to improve intersection capacity by merely adjusting signal control parameters, becomes challenging since exiting strategies may (or already) have reached their "theoretical" limits of optimum. Under such circumstance, several novel unconventional intersection designs, including the well-recognized continuous flow intersection (CFI) design, are originated to improve the capacity at bottleneck intersections. However, the requirement of installing extra sub-intersections in a CFI design would increase vehicular stops and, more critically, is unacceptable in tight urban areas with closed spaced intersections. To address these issues, this research proposes a simplified continuous flow intersection (called CFI-Lite) design that is ideal for arterials with short links. It benefits from the CFI concept to enable simultaneous move of left-turn and through traffic at bottleneck intersections, but does not need installation of sub-intersections. Instead, the upstream intersection is utilized to allocate left-turn traffic to the displaced left-turn lane. It is found that the CFI-Lite design performs superiorly to the conventional design and regular CFI design in terms of bottleneck capacity. Pareto capacity improvement for every traffic stream in an arterial system can be achieved under effortless conditions. Case study using data collected at Foothill Blvd in Los Angeles, CA, shows that the new design is beneficial in more than 90% of the 408 studied cycles. The testing also shows that the average improvements of green bandwidths for the synchronized phases are significant. (C) 2015 Elsevier Ltd. All rights reserved.

Increasing the Capacity of Signalized Intersections by Allocating Exit Lanes to Turning Movements

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Increasing the Capacity of Signalized Intersections with Dynamic Use of Exit Lanes for Left-Turn Traffic

An Integrated Capacity Optimization Model Based on Two Unconventional Intersections

Intersection control strategy optimization based on exchangeable lanes modeling

Integrated Control of Internal Boundaries and Signal Timing at An Isolated Intersection for Lane-Free Traffic of CAVs.

Integrated Optimization Model of Layouts and Signal Timings of Exit-lanes for Left-turn Intersections

Increasing the Capacity of the Intersection Downstream of the Freeway Off-Ramp Using Presignals

Increasing the Capacity of Intersections With Special Width Approach Lanes

Increasing the Capacity of Signalized Intersections with Left-Turn Waiting Areas

Configuration of Spatial-temporal Resources at Intersections Considering Travel Efficiencies of Mixed Flows

A Continuous-Flow-intersection-lite Design and Traffic Control for Oversaturated Bottleneck Intersections

A Sorting Area Strategy to Increase the Capacity of Isolated Intersections

Integrated Optimization of Transit Priority Operation at Isolated Intersections: A Person-Capacity-based Approach

Influence of signal on the capacity of signalized intersection

Bi-Level Programming Model for Dynamic Reversible Lane Assignment

Modeling Capacity of Shared Right-Turn Lanes at Signalized Intersections Considering the Lag Green Time of Right-Turns

Bicycle Crossing Design and Signal Control Optimization for the Symmetric Intersection

Two-Step Optimization Model for Dynamic Lane Assignment at Isolated Signalized Intersections

Optimization of lane assignment for signalized T-intersection based on vISSIM

Increasing Capacity of Intersections with Transit Priority