Binder Jet 3D Printing of 316L Stainless Steel: Orthogonal Printing and Sintering Process Optimization

Ling Chen,Weiping Chen,Zhiqiang Fu,Guangxin Ding,Zhiping Chen,Dezhi Zhu

DOI: https://doi.org/10.1002/adem.202200641

IF: 3.6

2022-01-01

Advanced Engineering Materials

Abstract:Binder jet 3D printing (BJ3DP) is an additive manufacturing technique that uses a liquid binder to selectively deposit powder layer by layer to fabricate 3D parts followed by sintering. Herein, the printing parameters, sintering temperature, and holding time of 316L stainless steel (SS) materials produced by BJ3DP technique are systematically investigated. Based on the L9 orthogonal experimental design, the green parts can achieve the highest relative density of ≈55.9%, when the layer thickness, binder saturation, and roller traverse speed are 150 μm, 35%, and 100 mm s−1, respectively. Five green parts printed using the optimal parameters are subsequently sintered under different temperatures and holding time. All the as‐sintered samples consist of a primary γ‐Fe phase and a small amount of δ‐ferrite phase. After sintering at 1435 °C for 7.5 h, the as‐sintered samples obtain the highest relative density of ≈92.1% along with the most excellent mechanical properties, displaying ultimate tensile strength of ≈558 MPa and an elongation of ≈41%. The mechanical properties of these samples sintered at 1435 °C for 7.5 h are also superior to those of the annealed 316L SS in ASTM A276/A276M‐17.