Abstract:The improved understandings of the mechanical properties as well as deformation mechanisms at cryogenic temperatures are the prerequisite for realizing the application of any new engineering materials to cryogenic industries. Here, a (CoCrNi) 94 Al 3 Ti 3 medium entropy alloy (MEA) with nanoscale L1 2 coherent precipitates and heterogeneous grain structures was prepared by co-doping Al and Ti elements with subsequent cold rolling and heat treatment processes. The mechanical properties were evaluated at the temperature range of 293–113 K. The ultimate strength of the MEA increases almost linearly from 1326 to 1695 MPa as the temperature decreases from 293 to 113 K, while the total elongation remains approximately constant of ∼35%. The underlying deformation and strengthening mechanisms were investigated using various characterization techniques. Due to the effect of co-doped Al/Ti on channel width of the matrix and the increasing critical twinning stress induced by heterogeneous ultrafine grain size, the formation of deformation twins is inhibited at all temperatures. Consequently, only a slight increase of the deformation twins and stacking faults in the deformed specimens with a decreasing temperature, which leads to the relative temperature-independence of the ductility. The dislocation cutting mechanism of L1 2 coherent precipitates and the heterodeformation induced (HDI) hardening both significantly contribute to the strain hardening so that an excellent combination of strength and ductility is obtained. Additionally, the evolution of lattice friction stress with deformation temperature is determined by quantitative analysis, indicating an approximately linear relationship between the lattice friction and temperature. The present work provides new insights into the strategy of achieving outstanding strength-ductility synergy of the MEA under the wide temperature range by coupling heterogeneous ultrafine-grained structure and coherent precipitation strategy.

Microstructure and Properties Evolution of Cu-Ti-Cr-Mg Alloy During Equal Channel Angular Pressing at Room Temperature and Cryogenic Temperature

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Structural Characterization of Binary Al-Cu Alloy Processed by Equal Channel Angular Pressing at Half of the Melting Point

Work Hardening Behavior and Microstructure Evolution of a Cu-Ti-Cr-Mg Alloy during Room Temperature and Cryogenic Rolling

Characterization of microstructural evolution and mechanical properties of Cu-Ni-Cr alloys deformed by ECAP

Impact of Equal Channel Angular Pressing on Mechanical Behavior and Corrosion Resistance of Hot-Rolled Ti-2Fe-0.1B Alloy

Microstructural evolution of Al-Mg-Er-Zr alloy by equal channel angular extrusion at room temperature

Microstructure evolution and mechanical properties of Cu-3Ag-xZr alloys processed by equal channel angular pressing

The microstructure and mechanical properties of Mg-Sn-based alloy processed by differential-thermal equal channel angular pressing

Effect of the Equal Channel Angular Pressing on the Microstructure and Phase Composition of a 7xxx Series Al-Zn-Mg-Zr Alloy

Micro/nanostructure high strength and high conductivity CuCrZr alloy prepared through equal channel angular pressing and aging treatment

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

Microstructure Evolution and Cooperative Strengthening Mechanism of Copper–Aluminum Bimetal Continuous Equal Channel Angular Pressing-Annealing Process

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures

Grain Refinement and Strengthening of an Aluminum Alloy Subjected to Severe Plastic Deformation through Equal-Channel Angular Pressing

Study on the Effect of the ECAP Deformation on the Organization and Properties of the Extruded Mg-Sn-Al Alloys

Deformation Microstructure and Property Control of CuCrZr Alloy Directionally Solidified at Room Temperature C-ECAP

Effect of cryogenic rolling and multistage thermo-mechanical treatment on the microstructure and properties of the Cu-0.4Cr-0.39Zn-0.1Mg-0.07Zr alloy

Study of strength-ductility and anisotropic behavior of Mg-Gd-Y-Zn-Zr alloy prepared by Equal channel double angular pressing

High Strength and High Electrical Conductivity CuMg Alloy Prepared by Cryorolling

Effect of Extrusion Temperature on Microstructure Evolution and Strengthening Mechanism of 7003-T6 Aluminum Alloy by Equal Channel Angular Pressing