Abstract:We present a simple and economically convenient method to fabricate nanopatterned ZnO films by imprinting lithography and use them for the layer alignment of liquid crystal (LC) displays. First, a one-dimensional nanopattern was obtained by laser interference lithography on a silicon wafer, and the silicon mold replica was transferred onto a flexible polydimethylsiloxane (PDMS) sheet for conformal patterning. The so-obtained PDMS mold was then applied on a ZnO film spin-coated on a glass substrate. During the imprinting process, the temperature was controlled from 100 to 250 °C to observe the transferring morphologies of the ZnO film; the nanopattern was successfully transferred at annealing temperatures of 200 and 250 °C because the ZnO film at the sol state filled the cavities of the PDMS nanopattern and solidified, forming a negative replica of the nanopattern. The direction of the nanopatterned ZnO film served as a guide for aligning the LC molecules on the LC surface at the centimeter scale and, due to their elastic characteristics and group behavior, propagating their directional states in the LC bulk. The resulting LC cell exhibited an enhanced electro-optical performance and high thermal endurance above 180 °C. The geometry of the alignment layer increased the electric field on the ZnO film and showed reduced threshold voltage. In addition, since flexible devices are generally based on polyimide, which imidized at around 200 °C, the relatively low annealing temperatures of our fabricated nanopatterned ZnO film allow it to be mounted on such devices without any deterioration of the underlying thermoplastic substrate. Therefore, nanopatterned ZnO has a considerable potential for advanced LC displays.

Liquid Crystal Display Device with Tunable Surface Wettability Alignment Layer of ZnO Using Magnetron Sputtering

P‐113: Ferroelectric LC Aligned on SiO2 Thin Films Using the Ion Beam Deposition and Its Applications

P-113: Ferroelectric LC Aligned on SiO[sub 2] Thin Films Using the Ion Beam Deposition and its Applications

P‐56: Aligning Liquid Crystals Using Self‐Assembled Monolayers

P‐137: Photoaligned Transflective Liquid Crystal Display with Single Cell Gap Using OCB and Low Twist Nematic Modes

P-56 / A . Murauski P-56 : Aligning Liquid Crystals Using Self-Assembled Monolayers

Liquid-Crystal Photoalignment by Super Thin Azo Dye Layer

Solution-Driven Imprinting Lithography of Sol-Gel ZnO Thin Films for Liquid Crystal Display

Lc Display Cell Photo-Alignment by A Super-Thin Azo-Dye Layer

Liquid crystal aligning capabilities on surface-reformed indium-doped zinc oxide films via ion-beam exposure

Vertical Alignment of Liquid Crystal on ITO Glass with Anodic Aluminum Oxide Thin Film

Tunable liquid crystal alignment and driving mode on lanthanum aluminum zirconium zinc‐oxide thin film achieved by convenient brush‐coating method

Investigations of the Mechanism of Liquid-Crystal Alignment on Rubbed Polyimide Films

Plastic Liquid Crystal Display with Polarizers Integrated Inorganic Conducting and Alignment Layers

Rigid-flex stamped indium tin oxide film for convertible self-alignment

Liquid crystal alignment on polymer liquid crystal Langmuir-Blodgett films

62.2: Alignment of Liquid Crystal with Nanoporous Anodic Aluminum Oxide (np‐aao) Layer for LCD Application

Ferroelectric polymer nanocomposite alignment layer in twisted nematic liquid crystal devices for reducing switching voltage

Liquid Crystal Alignment in Nanoporous Anodic Aluminum Oxide Layer for LCD Panel Applications.

Ultrafast Laser Nanostructured ITO Acts as Liquid Crystal Alignment Layer and Higher Transparency Electrode

Liquid Crystal Alignment on Polyimide Langmuir-Blodgett Films