Abstract:Even though lithium-sulfur batteries have appealing advantages including a high theoretical capacity and energy density, their commercial implementation has been seriously hindered by some notorious reasons, particularly the severe shuttling effect, the insulating nature of sulfur, the large volumetric variation during cycling and the sluggish redox reaction kinetics. To tackle these issues, a biomass (ginkgo-nut) derived N,S-codoped porous carbon (GC) with an interconnected honeycomb-like hierarchical structure is synthesized by a templated carbonization method, followed by hydrothermal growth of transition metal sulfide MS2 (M = Co, Ni) nanocrystals, giving rise to a hybrid 3D electrocatalyst. The unique structure constructed by N,S-codoping can expose more active sites and polar surfaces to physically confine and chemically adsorb polysulfides. Meanwhile, the embedded MS2 polyhedral-like nanoparticles further enhance the interaction with polysulfides and improve conversion and redox kinetics of polysulfides. Remarkably, with 80 wt% sulfur loading (∼2.5 mg cm-2), GC-CoS2 exhibits a reversible capacity of 988.8 mA h g-1 after 500 cycles at 0.1 C and an excellent capacity of 610.3 mA h g-1 after 1000 cycles at 2 C, outperforming bare GC and GC-NiS2. Compared with the electrochemical performances of the representative reported biomass-derived sulfur host for Li-S batteries, evidently, both the discharge capacity and cycling stability of our GC-CoS2 sample are superior. Density functional theory (DFT) calculation results suggest that CoS2 exhibits a higher binding energy towards lithium polysulfides and a lower energy barrier for Li+ diffusion on the surface compared to the NiS2 counterpart, suggesting that CoS2 is a better choice for lithium-sulfur batteries than NiS2. This work provides a new avenue to rationally design a carbonaceous catalyst host for high-performance lithium-sulfur batteries.

Natural nori-based porous carbon composite for sustainable lithium-sulfur batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

Biomass Derived Ni(OH)2@porous Carbon/sulfur Composites Synthesized by a Novel Sulfur Impregnation Strategy Based on Supercritical CO2 Technology for Advanced Li-S Batteries

Sustainable, Inexpensive, Naturally Multi-Functionalized Biomass Carbon for Both Li Metal Anode and Sulfur Cathode

A wheat flour derived hierarchical porous carbon/graphitic carbon nitride composite for high-performance lithium–sulfur batteries

Incorporating Cobalt Nanoparticles in Nitrogen-Doped Mesoporous Carbon Spheres Through Composite Micelle Assembly for High-Performance Lithium-Sulfur Batteries

Superhierarchical Cobalt-Embedded Nitrogen-Doped Porous Carbon Nanosheets As Two-in-One Hosts for High-Performance Lithium-Sulfur Batteries

Naturally derived honeycomb-like N,S-codoped hierarchical porous carbon with MS2 (M = Co, Ni) decoration for high-performance Li-S battery

Confining Sulfur in N-Doped Porous Carbon Microspheres Derived from Microalgaes for Advanced Lithium-Sulfur Batteries.

Multifunction-balanced porous carbon and its application in sulfur-loading host and separator modification for lithium–sulfur batteries

Immobilization and Catalytic Conversion of Polysulfide by In-Situ Generated Nickel in Hollow Carbon Fibers for High-Rate Lithium-Sulfur Batteries

Facile and low-cost preparation of Co and N co-doped hierarchical porous carbon as a functional separator for Li-S batteries

A N-Rich porous carbon nanocube anchored with Co/Fe dual atoms: an efficient bifunctional catalytic host for Li–S batteries

Selectively etched inhomogeneous metal-organic framework-derived CoS/N-codoped hierarchical hollow carbon for long-cycling lithium sulfur batteries

Co–TiO2 nanoparticles anchored in porous carbon matrix as an efficient sulfur host for lithium/sulfur batteries

Reduced porous carbon/N-doped graphene nanocomposites for accelerated conversion and effective immobilization of lithium polysulfides in lithium-sulfur batteries

Coralline-Like N-Doped Hierarchically Porous Carbon Derived from Enteromorpha as a Host Matrix for Lithium-Sulfur Battery

Multi-functional CoS2-N-C Porous Carbon Composite Derived from Metal-Organic Frameworks for High Performance Lithium-Sulfur Batteries

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries