Abstract:II-oxides wide-bandgap semiconductor, including the beryllium oxide (BeO), magnesium oxide (MgO), zinc oxide (ZnO), have large exciton binding energy (ZnO 60 meV, MgO 80 meV), high optical gain (ZnO 300 cm –1 ) and wide tunable band gap (3.37 eV ZnO, MgO 7.8 eV, BeO 10.6 eV), which are the advantages of achieving low-threshold laser devices in the ultraviolet wavelength. It is also one of the important candidates to replace the traditional gas arc lamp (such as mercury lamp, deuterium lamp, excimer lamp, xenon lamp etc.) as the source of deep ultraviolet and even vacuum ultraviolet. Although, during the past decades, the ZnO-based pn homojunction devices have made great progress in the near-UV electroluminescence, but as the band gap broadens, the acceptor (or donor) ionization energy becomes higher (On the order of hundreds meV), which causing the room temperature equivalent thermal energy (26 meV) cannot make the impurities ionizing effectively. In addition, the self-compensation effect in the doping process further weakens the carrier yield. These above drawbacks have become the bottleneck that hinders II-oxides wide-bandgap semiconductor from achieving ultraviolet laser devices and expanding to shorter wavelengths, and are also a common problem faced by other wide-bandgap semiconductor materials. The regulation of the electrical and luminescent properties of materials often depends on the control of critical defect states. The rich point defects and their combination types make the II-oxides wide-bandgap semiconductors an important platform for studying defect physics. For the identification and characterization of specific point defects, it is expected to discover and further construct shallower defect states, which will provide a basis for the regulation of electrical performance. In this paper, recent research results of II-oxides wide-bandgap semiconductors will be described from three aspects: high-quality epitaxial growth, impurity and point defects, p-type doping and ultraviolet electroluminescence. Through the overview of related research works, II-oxides wide-bandgap semiconductors are clarified as deep ultraviolet light sources materials. Meanwhile, indicates that the key to the regulation of electrical performance in the future lies in the regulation of point defects.

Wide Band Gap Semiconductor Optoelectronic Materials and Their Applications

Wide Bandgap Oxide Semiconductors: from Materials Physics to Optoelectronic Devices

Wide band gap chalcogenide semiconductors

Recent Advances in Characteristics of ZnO Semiconductor

Electronic Materials with Wide Band Gap: Recent Developments

Research and Applications of Visible Light Responsive Narrow Band Gap Semiconductor Photocatalytic Materials

Preface to the Special Issue on Ultra-Wide Bandgap Semiconductor Gallium Oxide: from Materials to Devices

Wide Bandgap Semiconductors for Ultraviolet Photodetectors: Approaches, Applications, and Prospects

Point defects: key issues for II-oxides wide-bandgap semiconductors development

ZnO-based Matierial, Heterojunction and Photoelctronic Device

Polymer Band Gap Engineering and Its Applications

Narrow Bandgap Metal Halide Perovskites: Synthesis, Characterization, and Optoelectronic Applications

Toward emerging gallium oxide semiconductors: A roadmap

Ultraviolet photodetectors based on wide bandgap semiconductor: a review

Progress of Research on Tuneable Wide-Band-gap Semiconductor MgxZn1-xO Thin Films

Emerging II-VI Wide Bandgap Semiconductor Device Technologies

ZnO-based Semiconductors and Structures for Transistors, Optoelectronic Devices and Sustainable Electronics

Low-dimensional wide-bandgap semiconductors for UV photodetectors

A Review of Wide Bandgap Semiconductors: Insights into SiC, IGZO, and Their Defect Characteristics

Thin-film transistors based on wide bandgap Ga2O3 films grown by aqueous-solution spin-coating method

Ultrawide‐Bandgap Semiconductors: Research Opportunities and Challenges