Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Design of Proton Beam Collimation System for HIAF-BRing

Physics design of phase and energy adjustment for heavy ion beam of the same mass with two-charge state on BISOL

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Design of A Compact Ring for Proton Radiation Applications

The optimization for the conceptual design of a 300 MeV proton synchrotron

Design of a Compact Beam Transport System for Laser-Driven Proton Therapy

The Preliminary Conceptual Design of the High-Power Neutron Converter for BISOL

Collimation with hollow electron beams

Beamline Analysis for a Laser-Driven Proton Therapy Accelerator Using Superconducting Bends

Design, fabrication, and cold test of an S-band high-gradient accelerating structure for compact proton therapy facility

Beam loading effects and microwave instability in the booster ring of a high intensity heavy-ion accelerator facility

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Beam dynamic design of a high intensity injector for proton linac

Injection method of barrier bucket supported by off-aligned electron cooling for CRing of HIAF

Design of a 162.5 MHz Superconducting Radio-Frequency Quadrupole for High-Intensity Proton Acceleration

Design of the Input Power Coupler for Boron Neutron Capture Therapy Drift Tube Linac

Conceptional Design of the Laser Ion Source based Hadrontherapy Facility

Design and beam dynamics simulation of an 8 MeV compact accelerator-driven neutron source

Design of Beam Collection System with High Transmission Efficiency and Tunablity

Beam dynamics design and irradiation experiment of beam loss for a CW 100-mA proton RFQ

New methods of particle collimation in colliders