Abstract:To accurately study the dynamic characteristics of the spiral bevel gear transmission system in a helicopter tail transmission system, the finite element model of the gear shaft was established by a Timoshenko beam element, and the mechanical model of the spiral bevel gear was created by the lumped mass method. The substructure method is employed to extract the dynamic parameters from the gearbox’s finite element model, and the dynamic model of the spiral bevel gear-shaft-bearing-gearbox coupling system was built according to the interface coordination conditions. In the model, the influences of time-varying stiffness, a time-varying transmission error, gearbox flexibility, unbalance excitation, and a flexible shaft and bearing support on the system vibration were taken into account simultaneously. On this basis, the dynamic differential equations of the full coupling system of the spiral bevel gear were derived, and the effects of the gearbox flexibility, the shaft angle, and the unbalance on the dynamic properties of the system were analysed. The results show that the gearbox flexibility can reduce the gear meshing force and bearing force, in which there is a more significant impact on the bearing force. The shaft angle affects the position, size, and direction of the system’s axis trajectory. Meanwhile, the meshing force and the bearing force of the system are also varied because of the various pitch angles of the driving and driven gears under different shaft angles. The unbalance of the gear shaft has an effect on the vibration of the spiral bevel gear transmission system in all directions, wherein the influence on the torsional vibration is the most significant, and the influence increases as the unbalance rises. The unbalance of the gear shaft also affects the meshing force and bearing force, which increases as the rotational speed rises. This research provides a theoretical basis to optimize dynamic performance and reduce the vibration and noise of a spiral bevel gear full coupling system.

Dynamic Modeling and Accuracy Evaluation Method for Complex Special-Shaped Components of Aviation Transmission

Modeling and Simulation of Aligning Process for Alignment Mechanism of Large Aircraft Component

Modeling of flexible bevel gear rotor systems: Modal and dynamic characterization

Dynamic Modeling of Central Bevel Gear Transmission System in Aero-Engine

Modeling Cantilever Branch Structure of Aero-Engine Power Turbine and Analyzing Its Influence

Dynamic modeling and analysis for a drive axle gear transmission system

A flexible-helical-geared rotor dynamic model based on hybrid beam-shell elements

Modeling strategy and dynamic analysis of a dual-rotor-bearing-casing system in aero-engine

Dynamic responses of electromechanical transmission system based on a nonlinear hybrid model

Modeling and dynamic analysis of spiral bevel gear coupled system of intermediate and tail gearboxes in a helicopter

Dynamic Modeling and Analysis of Helical Gear-Shaft-bearing Coupled System

A novel dynamic modeling method with slice coupling for thin-rimmed gear transmission

An Efficient Modeling Method For Coupled Vibration Analysis Of Double-Helical Gear Reduction

Modelling and Dynamic Analysis of the Spiral Bevel Gear-Shaft-Bearing-Gearbox Coupling System

Improving the Geometrically Nonlinear Intrinsic Beam Element Model of Wing for High Efficiency

Dynamic Model and Numerical Simulation of Multi-stage gear-rotor-bearing System

A FEA Simulation Model for Thin-Walled C-Section Composite Beam Assembling with R-Angle Deviation

Modal synthesis dynamic modeling and analysis for an automotive drive axle system

Application of improved hybrid interface substructure cms method in the modal analysis of mistuned bladed disk assemblies

Iterative Dynamic Condensation Method of Finite Element Model for Rotor-Bearing System

Dynamic modeling and analysis of the supercritical tail drive system of a helicopter considering the mounting platform deformation