Abstract:The gas hydrates in the pore space constitutionally affect the mechanical properties of gas hydrate-bearing sediments. The hydrates contribute to the mechanical properties of hydrate-bearing sediments by densifying, bearing and bonding effects. A discrete element model of hydrate-bearing silt was established by randomly filling hydrate particles into a silt-sized granular skeleton reservoir. Three ideal types of hydrate-bearing silt, namely, distributed particulate hydrate-bearing silt (type I), cluster hydrate-bearing silt (type II) and cemented cluster hydrate-bearing silt (type III) are proposed to study the mechanical effects of hydrate. One-dimensional loading (oedometer test) was applied to the numerical sample to investigate its stress evolution, volume change, bond degradation, coordination condition and stress transmission. The main conclusions are as follows. Type III sample exhibits a convex stress path due to bonding and then the stress path gradually returns to the pseudo linear stress path of type I sample due to bond breakage. The compression curve for the type II or type III sample exhibits a structural yield stress, which corresponds to abrupt bond breakage; the compression curves for types I, II and III evolve to be approximately coincident with each other at the end of compression. The average coordination number Z in type II or type III is approximately constant before widespread bond breakage, and then it will evolve to the curve of type I; the inflexion stress of the coordination numbers corresponds to the structural yield stress. The greatest magnitude of the mean stress bearing by hydrates in type II or type III sample is near the structural yield stress; the mean stresses ps - hb$$p_{{\text{s - h}}}^{{\text{b}}}$$ and ph - hb$$p_{{\text{h - h}}}^{{\text{b}}}$$ (created by bonded silt-hydrate and hydrate-hydrate contacts, respectively) in type III sample first increase under compression and then decrease due to widespread bond breakage, and they are exceeded by ps - hu$$p_{{\text{s - h}}}^{{\text{u}}}$$ and ph - hu$$p_{{\text{h - h}}}^{{\text{u}}}$$ (created by unbonded silt-hydrate and hydrate-hydrate contacts, respectively) after reaching the structural yield stress.

An Elastoplastic Constitutive Model for Hydrate-Bearing Sediments Considering the Effects of Filling and Bonding

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

A nonlinear constitutive model for soft clay stabilized by magnesia cement considering the effect of solidified agent content

A Critical State Constitutive Model for Methane Hydrate‐Bearing Sediments Considering Hydrate Pore‐Filling and Cementing Effects

A State-Dependent Elasto-Plastic Model for Hydrate-Bearing Cemented Sand Considering Damage and Cementation Effects

Mechanical behaviors of natural gas hydrate-bearing clayey-silty sediments: Experiments and constitutive modeling

A State-Dependent Subloading Constitutive Model with Unified Hardening Function for Gas Hydrate-Bearing Sediments

Influences of hydrate morphology and hydrate distribution heterogeneity on the mechanical properties of hydrate-bearing sediments using the discrete element method

Influence of layered hydrate accumulation on mechanical behavior of marine silty clay in South China Sea: Experimental study and constitutive modeling

A Practical Constitutive Model of Saturated Fractured Porous Rock Mass Considering the Fully Coupling Between the Pore and Fracture Domains

A bounding surface plasticity model for methane hydrate-bearing sediments in deep seabed

3D Elastoplastic Model for Fine-Grained Gassy Soil Considering the Gas-Dependent Yield Surface Shape and Stress-Dilatancy

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

An elastoplastic constitutive model for marine sedimentary soft clays

Influence of hydrate participation on the mechanical behaviour of fine-grained sediments under one-dimensional compression: a DEM study

Application and Improvement of a Stress Partition Framework-Based Methane Hydrate-Bearing Sediment Constitutive Model for Wide Range Confining Stress

A Basic Constitutive Model for Sands

A hypoplastic model for unsaturated sand accounting for drying and wetting cycles