Abstract:A novel elastoplastic constitutive model with an egg-shaped yield surface (ESE model) is proposed herein to elucidate the strength-deformation characteristics of marine soft clay. One of the key improvements offered by this model is its ability to address the singularity associated with plastic strain increments at yield surface corners—a limitation commonly encountered in traditional elastoplastic models. Additionally, the proposed model demonstrates flexibility, as it can transform into various forms under different conditions. Subsequently, to evaluate the efficacy of this egg-shaped elastoplastic model, numerical simulations are performed within the finite element software ABAQUS using an implicit integration algorithm through the user material subroutine interface (UMAT). The simulations encompass standard triaxial consolidation tests involving saturated soft clay sourced from the Itsukaichi marine clay as well as two types of saturated kaolin clays. The outcomes derived from these simulations by the ESE model are compared with both empirical data and numerical simulations originating from the widely employed Modified Cam-Clay (MCC) model. The simulations of the ESE model for three conventional triaxial tests on clay demonstrate superior concordance with experimental measurements in comparison to the MCC model. This underscores the efficacy of the proposed ESE model in predicting the strength and deformation characteristics manifested by coastal soft clays under undrained conditions. Finally, the predictions for deformation in an adjacent tunnel according to the ESE model closely align with experimental measurements and prior to the simulations conducted using the MCC model and advanced models such as the bounding surface model and the unified model, thereby affirming its practical utility in engineering applications.

An elastoplastic constitutive model for marine sedimentary soft clays

Thermodynamics-based bounding surface model for overconsolidated clay

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

A Strength Degradation Model of Saturated Soft Clay and Its Application in Caisson Breakwater

An Egg-Shaped Elastic Viscoplastic Model for Clay: Experimental Investigation and Constitutive Modelling

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

Rheological characteristics and one-dimensional isotache modelling of marine soft clays

Elasto-plastic model of structured marine clay under general loading conditions

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

An elastoplastic model with egg-shaped yield surface for coastal soft clay

An Updated Elastoplastic Damage Model for Structural Soft-Clays

Modeling Temperature-Dependent Behavior of Soft Clay

Modeling Strain-Rate Dependent Behavior of KR0-Consolidated Soft Clays

Constitutive Modelling of the Shakedown Response of Sensitive Clay to Undrained Long-Term Cyclic Loads Incorporating Structural Destruction

Elastoplastic constitutive modelling for mechanical behavior of Shanghai 4th layer clay

Constitutive modeling of anisotropic small-strain stiffness behavior of Shanghai soft clay

Energy-based Evaluation of Undrained Cyclic Behavior of Marine Soft Clay under Multidirectional Simple Shear Stress Paths

Elastoplastic Model for Overconsolidated Clays with Focus on Volume Change under General Loading Conditions

Undrained cyclic shear strength and stiffness degradation of overconsolidated soft marine clay in simple shear tests

A hardening/softening elasto-plastic constitutive model for soils