Abstract:Background: The microfluidic paper-based analytical devices (μPADs) have been highly regarded as effective tools that offer a cost-effective and portable solution for point-of-care testing (POCT) and on-site detection. Utilizing paper substrates such as cellulose and nitrocellulose membranes, μPADs have proven beneficial for a range of applications from medical diagnostics to environmental monitoring. Despite their advantages, the fabrication of μPADs often requires sophisticated techniques and equipment, posing challenges for widespread adoption, especially in resource-limited settings. This study addresses the need for a simplified, low-cost method for fabricating μPADs that is accessible without specialized training or equipment. Results: This research introduces a novel, efficient method for producing μPADs using 3D-printed slidable chambers and super glue vapor, bypassing traditional, more complex fabrication processes. The method utilizes super glue (ethyl-cyanoacrylate) vapor to create hydrophobic barriers on paper substrates. By optimizing the exposure sequence to super glue and water vapors and the heating conditions, we achieved rapid hydrophobization within 5 min, creating effective hydrophobic barriers and hydrophilic channels on paper substrates. The technique's simplicity allows for use by individuals without specialized training. The practical application of the fabrication method is demonstrated by the fabrication of μPADs that can detect multiple target analytes. We perform the simultaneous detection of glucose, proteins, and also the simultaneous detection of heavy metal ions nickel (Ni2+) and copper (Cu2+), highlighting its potential for broad applications in point-of-care diagnostics. Significance: This study is the first to report a method for selective exposure of ethyl-cyanoacrylate vapor for the fabrication of μPADs. This method significantly reduces the complexity, time, and fabrication cost, making it feasible for use in various settings. It also eliminates the need for specialized equipment and can be executed by individuals without specialized training. We believe that the proposed fabrication method contributes to the wider adoption and deployment of μPADs across various sectors.

Rapid Assembly of Cellulose Microfibers into Translucent and Flexible Microfluidic Paper-Based Analytical Devices Via Wettability Patterning

Rapid Fabrication of Modular 3D Paper-Based Microfluidic Chips Using Projection-Based 3D Printing

3D Printed Paper-Based Microfluidic Analytical Devices

Low-cost Fabrication of a Paper-Based Microfluidic Using a Folded Pattern Paper.

Bottom-Up Fabrication of Paper-Based Microchips by Blade Coating of Cellulose Microfibers on a Patterned Surface

A low-cost and rapid microfluidic paper-based analytical device fabrication method: flash foam stamp lithography

Fabrication of Paper-Based Microfluidics by Spray on Printed Paper

Fabrication of paper-based microfluidic analysis devices: a review

Microfluidic Paper-Based Analytical Devices Fabricated By Low-Cost Photolithography And Embossing Of Parafilm (R)

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

Rapid Fabrication of Paper-Based Microfluidic Analytical Devices with Desktop Stereolithography 3d Printer

Origami microfluidic paper-analytical-devices (omPAD) for sensing and diagnostics

Facial Fabrication of Paper-Based Flexible Electronics with Flash Foam Stamp Lithography

A novel low-cost and simple fabrication technique for a paper-based analytical device using super glue

Development of a Paper-Based Microfluidic Analytical Device by a More Facile Hydrophobic Substrate Generation Strategy

Microfluidic PDMS on Paper (POP) Devices

Fabrication of paper-based microfluidic devices by octadecyltrichlorosilane self-assembling and uv-patterning

Fabrication of paper-based microfluidic sensors by printing.

Fabrication of Paper-Based Microfluidic Devices by Plasma Treatment and Its Application in Glucose Determination

Facile Microembossing Process for Microchannel Fabrication for Nanocellulose-Paper-Based Microfluidics

Fabrication of Paper-Based Microfluidic Device by Recycling Foamed Plastic and the Application for Multiplexed Measurement of Biomarkers.