Abstract:Under the background of energy conservation and emission reduction in the aviation industry, blends of ethanol with aviation kerosene have been widely accepted as a potential alternative fuel. Investigating its evaporation process is essential for comprehensively understanding the mechanisms of spray combustion process, which provides significant insights for improving the utilization of aviation fuel. Therefore, in this study, the effects of initial droplet size, ambient temperature and pressure on the micro-explosion and evaporation characteristics of RP70E30 droplets (70% RP-3 aviation kerosene and 30% ethanol by mass) are experimentally investigated. The evolutions of droplet temperature and size are simultaneously obtained by a suspended thermocouple and a highspeed video camera. The results indicate that in the cases without micro-explosion, RP70E30 droplet evaporation undergoes two stages, namely: transient heating and equilibrium evaporation stages. While the evaporation process of RP70E30 droplet with micro-explosion could be separated into three stages: transient heating, fluctuation evaporation and equilibrium evaporation stages. The sequential order of fluctuation evaporation stage and equilibrium evaporation stage is determined by the occurrence time of micro-explosion. RP70E30 droplets only exhibit weak rupture phenomena: weak micro-explosion and puffing. For all test conditions, a continuous increase in droplet temperature is observed throughout the entire evaporation process, and its trend exhibits a three-stage characteristic, including a rapid rise, a slow rise and then another rapid rise stages. At 400 degrees C and 1 bar, increasing initial droplet diameter (from 0.746 to 1.258 mm) can promote the heating and evaporation of RP70E30 droplet. While at 1 bar and 600 degrees C, the droplet with an initial diameter of 1.156 mm evaporates at a slower rate than droplet with an initial diameter of 1.030 mm in the early evaporation process. This is because weak micro-explosion somewhat suppresses the evaporation of PR70E30 droplet, which is attributed to the formation of bubbles increasing the heat transfer resistance inside the droplet. The droplets having similar initial diameters (from 0.95 to 1.05 mm) were selected to investigate the effects of ambient pressure and temperature on evaporation. At all the studied temperatures (400-600 degrees C) and pressures (1-20 bar), increasing ambient pressure and temperature both have a promoting effect on the heating and evaporation of RP70E30 droplet. Moreover, at 1 bar, high temperature can increase the possibility of micro-explosion. At 5-20 bar, no microexplosion occurs.

Experimental Study on the Evaporation Characteristics of Jatropha Curcas Oil Methyl Ester (Jme)-Ethanol Blended Droplets

Experimental Investigation on the Evaporation and Micro-Explosion Mechanism of Jatropha Vegetable Oil (JVO) Droplets

Effect of Nanoparticles Concentration on the Evaporation Characteristics of Biodiesel

Experimental Study on Evaporation and Micro-Explosion Characteristics of Ethanol and Diesel Blended Droplets

Experimental Investigation on Evaporation and Micro-Explosion Characteristics of Ethanol/rp-3 Aviation Kerosene Blend Droplets at Elevated Pressures and Temperatures

Microexplosion Kinetics of Alcohol-Based Emulsified Biodiesel Droplets Evaporated in High Temperature

Experimental study on the evaporation characteristics of biodiesel-ABE blended droplets

Effect of micro-explosion of biodiesel and ethanol droplets on evaporation: A three-stage mixed fuel droplet evaporation model

Experimental Study on Evaporation Characteristics of Methyl Oleate Droplet Across Critical Pressure and Temperature Environments

Experimental investigations on nucleation, bubble growth, and micro-explosion characteristics during the combustion of ethanol/Jet A-1 fuel droplets

Measurement of Interacting Ethanol Droplets Evaporation at Moderately Elevated Temperature and Pressure Using Phase Rainbow Refractometry

Investigation of Single Drop Evaporation Characteristics of Two-Component Fatty Acid Methyl Esters at High Temperature

Experimental Study on Evaporation Characteristics of Lubricating Oil/gasoline Blended Droplet

Study on Micro-Explosion Intensity Characteristics of Biodiesel, RP-3 and Ethanol Mixed Droplets

A Study on Puffing and Micro-Explosion Characteristics of Diesel/ethanol/tetrahydrofuran Blend Fuel Droplets

Study on combustion and micro-explosion characteristics of biodiesel and ethanol mixture droplets under different oxygen concentrations and temperatures

Vacuum distillation of C16 methylester and C18 methylester in biodiesel

Experimental and Theoretical Investigation of Contact-Angle Variation for Water–ethanol Mixture Droplets on a Low-Surface-energy Solid

Expansion/micro-explosion of ethanol-biodiesel droplet doped with microparticles in oxygenated hot co-flow

Experimental study on evaporation and micro-explosion characteristics of biodiesel/n-propanol blended droplet

Experimental study on the micro-explosion characteristics of biodiesel/1-pentanol and biodiesel/ methanol blended droplets