Abstract:Purpose Heterogeneous and micro-structured materials have been the object of multiscale and homogenization techniques aimed at recognizing the elastic properties of the equivalent continuum. The proposed investigation deals with the mechanical characterization of the heterogeneous material structured metamaterials through analyzing the ultimate strength using the limit analysis of the Representative Volume Element (RVE). To get the desired material strength, a novel finite element formulation based on the derivation of self-equilibrated solutions through the finite elements devoted to calculating the lower bound theorem has been implemented together with the limit analysis in Melàn's formulation. Design/methodology/approach The finite element formulation is based on discrete mapping of Volterra dislocations in the structure using isoparametric representation. Using standard finite element techniques, the linear operator V, which relates the self-equilibrated internal solicitation to displacement-like nodal parameters, has been built through finite element discretization of displacement and strain. Findings The proposed work presented an elastic homogenization of the mechanical properties of an elementary cell with a geometry known in the literature, the isotropic truss. The matrix of elastic constants was calculated by subjecting the RVE to numerical load tests, simulated with a commercial FEM calculation code. This step showed the dependence of the isotropy properties, verified with Zener theory, on the density of the RVE. The isotropy condition of the material is only achieved for certain section ratios between body-centered cubic (BCC) and face-centered cubic (FCC), neglecting flexural effects at the nodes. The density that satisfies Zener's conditions represents the isotropic geomatics of the isotropic truss. Originality/value For the isotropic case, the VFEM procedure was used to evaluate the isotropy of the limit domain and was compared with the Mises–Schleicher limit domain. The evaluation of residual ductility and dissipation energy allowed a measurement parameter for the limit anisotropy to be defined. The novelty of the proposal consisted in the formulation of both the linearized and the nonlinear limit locus of the material; hence, it furnished the starting point for further limit analysis of the structures whose elementary volume has been described through the proposed approach.

An FEM-based Homogenization Method for Orthogonal Lattice Metamaterials Within Micropolar Elasticity

Homogenized Models of Mechanical Metamaterials

Analytical homogenization for equivalent in-plane elastic moduli of prestressed lattices based on the micropolar elasticity model

Anisotropic hyperelastic constitutive models for finite deformations combining material theory and data-driven approaches with application to cubic lattice metamaterials

A homogenization method incorporating surface effect for thin metamaterial structure

Modal Response Improvement of Periodic Lattice Materials with a Shear Modulus-Based FE Homogenized Model

Determination of Metamaterial Parameters by Means of a Homogenization Approach Based on Asymptotic Analysis

Computational Design of Flexible Planar Microstructures

Discrete Transformation Elasticity: An Approach to Design Lattice-based Polar Metamaterials

Multiscale Eigenfrequency Optimization of Multimaterial Lattice Structures Based on the Asymptotic Homogenization Method

Material modeling for parametric, anisotropic finite strain hyperelasticity based on machine learning with application in optimization of metamaterials

Multifunctional mechanical metamaterials with tunable double-negative isotropic properties

Lattice metamaterials with controllable mechanical properties inspired by projection of four-dimensional hypercubes

An Effective Design Method for Mechanical Metamaterials with Negative Poisson's Ratios.

Status and Challenges in Homogenization Methods for Lattice Materials

Challenges in two‐scale computational homogenization of mechanical metamaterials

Mechanical properties characterization and zero Poisson’s ratio design for perforated auxetic metamaterial by computational homogenized method

Dislocation-based finite element method for homogenized limit domain characterization of structured metamaterials

Computational Design of Finite Strain Auxetic Metamaterials via Topology Optimization and Nonlinear Homogenization

Efficient and accurate analysis of locally resonant acoustic metamaterial plates using computational homogenization