Moderate Micro-Explosion During the Combustion of Iron Wire in Atmospheric Air

Chengdong Kong,Yu Wang,Yong Qian,Xiaojiang Wu,Zhongxiao Zhang

DOI: https://doi.org/10.1016/j.proci.2022.08.070

IF: 6.535

2023-01-01

Proceedings of the Combustion Institute

Abstract:The combustion of a thin iron wire in atmospheric air was investigated through the in-situ high-speed videography and the sampled product characterization. During the iron wire burning, a hot spherical ball was found to form at the wire tip and propagate with a speed of around 3.5 cm/s along the wire. Mean-while, small bright droplets were randomly ejected from the burning ball. In fact, the burning spherical ball is hollow to be a ferric bubble according to the SEM image of sampled product. The high-speed videography further indicates that the small droplet ejection occurs largely owing to the bubble bursting, that is called the moderate micro-explosion to be different from the conventional micro-explosion process. For this bubble bursting process, the volume expansion rate inside the burning bubble needs not to be very fast but the bubble size should be adequate. If the bubble is too small (e.g. < 50 & mu;m), the droplet ejection during bubble bursting may be difficult to occur. Furthermore, the bubble formation is mainly attributed to the fact that carbon dissolved in iron can be preferentially oxidized to produce CO2, which nucleates to generate a large bubble inside the ferric ball. It is noted that less than 0.05%wt of carbon content is enough for the bubble forma-tion. It thereby suggests that carbon content should be accurately measured to predict the micro-explosion phenomena during iron combustion.