Abstract:Summary form only given. Exploding wire is performed by rapidly heating the wire to vaporization temperature with a high current pulse flowing through the wire. Exploding wires have found many applications among which are the opening switches named fuses in the circuits for inductive energy storage, the discharge loads of X-pinch or Z-pinches, namely wire array Z-pinches, and the production of nanopowders. The behavior of exploding wires for nanopowder production was studied by experiments and numerical simulation. In experiments, the evolution of the exploding wire was recorded by taking time- resolved pictures of the explosion with a Mach-Zehnder interferometer. From the interferograms the electron density and the expansion speed of the metallic vapor from the exploding wire can be deduced. The shock wave in front of the expanding wire could be visualized. In numerical simulation, the electrical behavior of exploding wires was obtained by solving nonlinear differential equation describing the discharge circuit. For the metal wires of high conductivity and low sublimation heat, such as Copper, Aluminum, Gold and Silver, the circuit simulation could be well conducted based on the resistivity model developed by Tucker1 in which the resisitivity was expressed with the explicit functions of specific action, i.e., p = f(g) . For the metals such as Titanium and Zinc of their resistivity anomalously changing, i.e., decreasing rather than increasing, with the liquid heating, the circuit simulation of the exploding wires could be performed using the implicit relationship between p and g that is read out point by point from the experimentally measured curve. With the circuit simulation the rate of the energy deposition in the exploding wires before the explosion could be obtained, which is helpful to choose right experimental conditions for possible overheat that is desirable for getting smaller nanopowders produced by exploding wires.

Discharge Channel Development of Microsecond Tungsten Wire Explosion in Air

High-Speed Imaging of Transition from Fluid Breakup to Phase Explosion in Electric Explosion of Tungsten Wires in Air

Study on Electrical Explosion of Bare and Insulation Coated Tungsten Wires

Electrical Explosion Across Gas–liquid Interface: Aerosol Breakdown, Shock Waves, and Cavity Dynamics

Study of Density Distribution of Electrical Exploding Tungsten Wire in Air

Study of the Relationship Between Maximum Specific Energy and Wire Diameter During Electrical Explosion of Tungsten Wires

Effect of Medium Pressure and Charging Voltage on Plasma Characteristics During Microsecond Explosion of Single Metallic Wire

Spatial-temporal evolution of plasma radiation in electrical wire explosion: a morphological observation

Electrical Characteristics of Microsecond Electrical Explosion of Cu Wires in Air under Various Parameters

INFLUENC OF DIELECTRIC COATING AND SOLDERING ON ELECTRICAL EXPLOSION OF TUNGSTEN WIRES

Experiments on Plasma Dynamics of Electrical Wire Explosion in Air

Effect Of Medium On Deposited Energy In Microsecond Electrical Explosion Of Wires

A Platform for Exploding Wires in Different Media.

Discharge Characteristics and Spatial-Temporal Evolution of Cu-Ni Alloy Wire Explosion

Characteristics Of Exploding Metal Wires In Water With Three Discharge Types

Electrical explosion in confined space: From warm dense matter to fragmentation

Imaging of Discharge Plasma Channel Evolution Process of Microsecond Wire Explosion in Air

Behavior of exploding wires

Factors Affecting The Exploding Characteristics Of Tungsten Wires With Negative-Polarity Current

Energy Deposition in Electrical Explosion of Silver Wire in Vacuum

Experimental Verification of the Vaporization's Contribution to the Shock Waves Generated by Underwater Electrical Wire Explosion under Micro-Second Timescale Pulsed Discharge