Abstract:The projection displays which use lasers or laser hybrids as light sources have been widely applied in offices, homes, and theaters. The optical performance has been more enhanced recently with the development of the technologies, especially in light enhancement, color reproduction, luminance contrast, and dynamic range. The characterization and measurement for these projection displays become very important. The full‐frame projection technologies such as digital micromirror devices (DMDs), liquid crystal on silicon (LCOS), and liquid crystal display (LCD) projectors are typically concerned in the international standardization. The image quality of the projection system in graphics and video reproduction has been discussed in IEC WG10 “Working group of Laser Displays.“ In recent years, the IS (international standard)‐ IEC62906‐5‐1 Laser display and devices Part 5‐1 Measurement of Optical Performance for Laser Front Projection has been developed and reached the CDV stage. However, at this stage, there are some discussions among the expert’s group on the issues of the optical measurement method. The main issues are the two topics related to the CLO (Color Light Output) and CGV (Color Gamut Volume). There are two opposing views within the working group which is a very challenging topic. According to IEC/ISO rule, the consensus is difficult to be achieved for more 2/3 favor support and less 1/4 against. In the traditional projectors, due to the graphic display is mainly used for black and white usage in the office application, the luminous flux output of the full white field was used as the primary indicator in the specification of the standard product. The light output is directly dependent on the power of the projection source. Therefore, a white light enhancement method is employed in some projection display technologies, and in such cases, the brightness of a color display is often lacking. However, this is no longer the general case. Manufacturer use different ways to boost the white lumen value for the full white screen, but the saturated colors do not get the same boost in brightness. The lumen ratio between the full white and the colors is no longer maintained. In the new standard we recommend using a regional grid pattern to test the projector's light output, including white light output and color light output. Set of four colour tile test patterns used for projector characterization figure Moreover, the argue for color volume method is the derivative from the CLO/WLO issue. The main point is the argument between the applicability of CGV method (CIELAB usage) in HDR/SDR conditions. In this paper, we reviewed some of the most important aspects to provide a basic understanding the current development of laser projection display measurement in IEC standardization. Example of range in colors produced by a given display as represented by the CIELAB color space figure

16.1: Invited Paper: Measurement of Perceived Pixel Luminance of Large LED Displays

Display Measurement Using Imaging Color Luminance Meter and Its Uncertainty

P-112: Three-Dimensional Volumetric Display System Based on a Rotating Two-Dimensional LED Array

Measurement of Led Spatial Intensity Distribution Using Imaging

Direct Design of Thin and High-Quality Direct-Lit LED Backlight Systems

Energy-Efficient Perovskite LEDs with Rec. 2020 Compliance

Measurement of image quality for large-screen displays based on audience viewing: Overview of standardization and preliminary study on laser projection displays and LED displays

Characteristics Measurement Methodology of the Large-Size Autostereoscopic 3d Led Display

Two-Dimensional Pixel-Level Photometric and Colorimetric Mass-Distribution Measurement of Micro-Displays

Investigation of Perceptual Attributes for Mobile Display Image Quality

15.4: Weight Optimization of Near‐Eye Light Field Displays Based on Human Visual System

P-66: Near-eye Light Field Displays Optimization Based on Sub-pixel Structure of LCD

28.1: <i>Invited Paper:</i> What’s the Focus of Debate in IEC Standardization for the Measurement of Laser Projection Displays?

Investigation on Circadian Regulation of Four-Primary LED Display Differed in People by GA

53.2: Invited Paper: Current IEC Standardization on Evaluating Image Resolution in VR/AR Displays

P‐87: A Novel Method for Measuring Optical Performance of AR/VR Displays

Halo effect measurement for mini‐light‐emitting diode backlight liquid crystal displays

Display Dimming Model Characterized By Three-Dimensional Ergonomic Study

Influence of Phosphor Particle Size on Visual and Non-Visual Performances of White Light-Emitting Diodes for General Lighting

Investigation of Enhanced Ambient Contrast Ratio in Novel Micro/Mini-LED Displays

Study on a system for LED's photometric and colorimetric measurement based on a multi-channel spectrometer