Abstract:Background: In breast CT, scattered photons form a large portion of the acquired signal, adversely impacting image quality throughout the frequency response of the imaging system. Prior studies provided evidence for a new image acquisition design, dubbed Narrow Beam Breast CT (NB-bCT), in preventing scatter acquisition. Purpose: Here, we report the design, implementation, and initial characterization of the first NB-bCT prototype. Methods: The imaging system's apparatus is composed of two primary assemblies: a dynamic Fluence Modulator (collimator) and a photon-counting line detector. The design of the assemblies enables them to operate in lockstep during image acquisition, converting sourced x-rays into a moving narrow beam. During a projection, this narrow beam sweeps the entire fan angle coverage of the imaging system. The assemblies are each comprised of a metal housing, a sensory system, and a robotic system. A controller unit handles their relative movements. To study the impact of fluence modulation on the signal received in the detector, three physical breast phantoms, representative of small, average, and large size breasts, were developed and imaged, and acquired projections analyzed. The scatter acquisition in each projection as a function of breast phantom size was investigated. The imaging system's spatial resolution at the center and periphery of the field of view was measured. Results: Minimal acquisition of scattered rays occurs during image acquisition with NB-bCT; results in minimal scatter to primary ratios in small, average, and large breast phantoms imaged were 0.05, 0.07, and 0.9, respectively. System spatial resolution of 5.2 lp/mm at 10% max MTF and 2.9 lp/mm at 50% max MTF at the center of the field of view was achieved, with minimal loss with the shift toward the corner (5.0 lp/mm at 10% max MTF and 2.5 lp/mm at 50% max MTF). Conclusion: The disclosed development, implementation, and characterization of a physical NB-bCT prototype system demonstrates a new method of CT-based image acquisition that yields high spatial resolution while minimizing scatter-components in acquired projections. This methodology holds promise for high-resolution CT-imaging applications in which reduction of scatter contamination is desirable.

Development of a Novel Upright Dedicated Cone Beam Breast CT

A Prototype System of Upright Dedicated Cone-Beam Breast CT

Synthetic CT generation from cone-beam CT using deep-learning for breast adaptive radiotherapy

WE-E-201B-02: Development of a Tetrahedron Beam Computed Tomography Benchtop System with a 75 Pixel Field Emission X-Ray Tube: System Setup and Performance Evaluation

Cone-beam x-ray luminescence computed tomography (CB-XLCT) prototype development and performance evaluation

Non-Circular Scans and Image Reconstruction for Breast Ct

Narrow beam breast CT: proof-of-concept

TU‐E‐110‐04: Tetrahedron Beam Computed Tomography

Evaluation of a compact cone beam CT concept with high image fidelity for point-of-care brain imaging

The new development of dedicated breast CT technology

SU‐CC‐J‐6C‐07: Helical Cone‐Beam CT for Radiation Therapy

Novel Detector Configurations in Cone-Beam CT Systems: A Simulation Study

A cone-beam tomography system with a reduced size planar detector: a backprojection-filtration reconstruction algorithm as well as numerical and practical experiments.

Non-Circular Cone Beam Ct Trajectories: A Preliminary Investigation on A Clinical Scanner

Reconstructing Cone-Beam CT with Spatially Varying Qualities for Adaptive Radiotherapy: a Proof-of-principle Study.

Parallel Diffusion Model-based Sparse-view Cone-beam Breast CT

SU-DD-A4-05: Development of a Tetrahedron Beam Computed Tomography Benchtop System with a 75 Pixel Field Emission X-Ray Tube: Collimator Design and Image Reconstruction

An attenuation field network for dedicated cone beam breast CT with short scan and offset detector geometry

Application of Asymmetric Cone-Beam CT in Radiotherapy

Dedicated breast CT: state of the art—Part I. Historical evolution and technical aspects

Single Scan Dual-energy Cone-beam CT Using Static Detector Modulation: A Phantom Study