Abstract:Background: In breast CT, scattered photons form a large portion of the acquired signal, adversely impacting image quality throughout the frequency response of the imaging system. Prior studies provided evidence for a new image acquisition design, dubbed Narrow Beam Breast CT (NB-bCT), in preventing scatter acquisition. Purpose: Here, we report the design, implementation, and initial characterization of the first NB-bCT prototype. Methods: The imaging system's apparatus is composed of two primary assemblies: a dynamic Fluence Modulator (collimator) and a photon-counting line detector. The design of the assemblies enables them to operate in lockstep during image acquisition, converting sourced x-rays into a moving narrow beam. During a projection, this narrow beam sweeps the entire fan angle coverage of the imaging system. The assemblies are each comprised of a metal housing, a sensory system, and a robotic system. A controller unit handles their relative movements. To study the impact of fluence modulation on the signal received in the detector, three physical breast phantoms, representative of small, average, and large size breasts, were developed and imaged, and acquired projections analyzed. The scatter acquisition in each projection as a function of breast phantom size was investigated. The imaging system's spatial resolution at the center and periphery of the field of view was measured. Results: Minimal acquisition of scattered rays occurs during image acquisition with NB-bCT; results in minimal scatter to primary ratios in small, average, and large breast phantoms imaged were 0.05, 0.07, and 0.9, respectively. System spatial resolution of 5.2 lp/mm at 10% max MTF and 2.9 lp/mm at 50% max MTF at the center of the field of view was achieved, with minimal loss with the shift toward the corner (5.0 lp/mm at 10% max MTF and 2.5 lp/mm at 50% max MTF). Conclusion: The disclosed development, implementation, and characterization of a physical NB-bCT prototype system demonstrates a new method of CT-based image acquisition that yields high spatial resolution while minimizing scatter-components in acquired projections. This methodology holds promise for high-resolution CT-imaging applications in which reduction of scatter contamination is desirable.

Dedicated breast CT: state of the art—Part I. Historical evolution and technical aspects

Dedicated breast CT: state of the art—Part II. Clinical application and future outlook

Next Generation Dedicated 3d Breast Imaging With Xact

Dedicated Breast CT: Getting Ready for Prime Time

The new development of dedicated breast CT technology

Breast CT: potential for breast cancer screening and diagnosis

A review on 4D cone‐beam CT (4D‐CBCT) in radiation therapy: Technical advances and clinical applications

A Preliminary Study Of Image Reconstruction From Low-Dose Data In Dedicated Breast Ct

Parallel Diffusion Model-based Sparse-view Cone-beam Breast CT

Accelerated 3D high-resolution T2-weighted breast MRI with deep learning constrained compressed sensing, comparison with conventional T2-weighted sequence on 3.0 T

[A comprehensive review on photon-counting computed tomography: Principles, technical hurdles and analysis of clinical applications]

State-of-the-art for contrast-enhanced mammography

Advances in Computed Tomography Imaging Technology

Adaptive Image Rescaling for Weakly Contrast-Enhanced Lesions in Dedicated Breast CT: A Phantom Study

Recent Trends in Medical Imaging Modalities and Challenges For Diagnosing Breast Cancer

A Prototype System of Upright Dedicated Cone-Beam Breast CT

Qualitative and Quantitative Image Analysis of 16 Cm Wide-Coverage Computed Tomography Compared to New-Generation Dual-Source CT.

Exploring advanced 2D acquisitions in breast tomosynthesis: T-shaped and Pentagon geometries

Narrow beam breast CT: proof-of-concept

Technical note: Characterization, validation, and spectral optimization of a dedicated breast CT system for contrast‐enhanced imaging

Stationary Digital Breast Tomosynthesis System That Uses a Carbon Nanotube X-ray Source Array: a Feasibility Study