Abstract:Adjacent excavations may have adverse impacts on the existing tunnels. Due to the increasing demand for building excavations in close proximity to existing metro tunnels, ensuring the safety and integrity of tunnel structures is a major challenge for city designers and geotechnical engineers. Urban metro tunnels in soft areas of Chinese cities are often constructed using shield tunnelling technology, and the installed precast reinforcement concrete segmental lining are generally connected together by various steel bolts. Due to the presence of joints, the overall tunnel stiffness, including the bending stiffness and shearing stiffness, are significantly reduced. Due to the reduction in shearing stiffness, the tunnel longitudinal deformation can be decomposed into two distinct modes: a bending mode and a shearing dislocation mode. However, current methods for predicting tunnel longitudinal responses to adjacent excavations generally simplify a tunnel as an Euler-Bernoulli beam, which only considers the bending effect and ignores the shearing deformation of jointed tunnels. Moreover, tunnel-ground interactions are commonly considered through the Winkler foundation model, which is unable to account for the interactions of adjacent springs and leads to overestimations of shear forces and bending moments in shield tunnels. In this paper, a new analytical method is proposed that uses a Timoshenko beam to simulate jointed shield tunnel responses when subjected to an adjacent excavation, which can consider both the bending and shearing effects of a shield tunnel. The tunnel-ground interaction is considered by introducing Pasternak two-parameter foundation, which is able to further take account for the interaction between adjacent springs. The tunnel-excavation interaction is analyzed using a two-stage analysis method. First, the excavation-induced unloading stress on the existing tunnel is computed using Mindlin’s solution. Second, the tunnel longitudinal deformation due to the corresponding stress is calculated using finite difference method. The effectiveness of the proposed approach is validated by two well-document case histories, including finite element analysis and field measurement. The predicted results are also compared with those obtained using the traditional methods. Based on the verified analytical solution, a parametric analysis is also conducted to investigate the effects of key factors on the responses of existing tunnels, including excavation-tunnel relative position, ground Young’s modulus and equivalent shearing stiffness.

Experimental investigation of mechanical characteristics for linings of twins tunnels with asymmetric cross-section

Analysis on the longitudinal deformation of tunnels due to pit excavation considering the tunnel shearing effect

Simplified analytical method for evaluating the effects of adjacent excavation on shield tunnel considering the shearing effect

RESEARCH ON LINING MECHANICAL BEHAVIOUR OF TWIN TUNNELS WITH A BIG SPAN AND A SMALL SEPARATION BY FIELD TEST

Study on mechanical rules of double-lining in creeping surrounding rock

Experimental Investigation on the Failure Characteristic and Synergistic Load-Bearing Mechanism of Multi-Layer Linings for Deep Soft Rock Tunnels

Analytical Method for Structural Analysis of Segmental Lining Interaction with Nonlinear Surrounding Soil and Its Application in Physical Test Interpretation

Prediction of lining response for twin tunnels constructed in anisotropic clay using machine learning techniques

Experimental study on the mechanical behavior and deformation characteristics of lining structure of super-large section tunnels with a small clearance

Model test study on the mechanical response of the deep buried tunnel lining

Experimental and numerical study of the failure mechanism and stability of tunnel linings under different cavity conditions

Model research on failure mechanism and lining stress characteristics of shallow buried tunnel under unsymmetrical pressure

Mechanical behavior of closely spaced tunnels – laboratory model tests and FEM analyses

Model Test to Investigate the Failure Mechanisms and Lining Stress Characteristics of Shallow Buried Tunnels under Unsymmetrical Loading

Mechanical responses of surrounding rock mass and tunnel linings in large-span triple-arch tunnel

A double tunnels model test study on mechanical properties of surrounding rock during tunnels excavation and creep stages

3D modeling of longitudinal shear transference of tunnel in soft ground

Cracking performance of asymmetric double-arch tunnels due to the voids behind linings

A Theoretical Solution for Interaction Between Lined Twin Tunnels at Great Depths by a New Alternating Procedure

Numerical Simulation on the Stress and Strain of Lining Structure with Double Shield Tunneling Construction

The Critical Behaviour of Finite Thickness Lining Systems in Tunnels