Abstract:Zhang, Zhenlin ; Xiao, Ying ; Xu, Jun ; Li, Chao ; Tan, Feng-Liang ; Luo, Yajun ; Liu, Kecai ; In this study, Al-Si-Cu-Mg composites reinforced with Silicon carbide (SiC) particles and/or Carbon nanotubes (CNTs) were fabricated using semi-solid stirring casting technology (SSC). The aim of the study was to investigate the influence of SiC and/or CNTs on the mechanical properties, microstructural evolution, and deformation mechanisms of the Al-Si-Cu-Mg alloy. The findings indicated that the presence of SiC/CNTs in the composite had a significant effect on refining the α-Al phase and altering its grain orientation. Additionally, the results obtained from EBSD and TEM revealed that the microstructure of the Al-Si-Cu-Mg-SiC/CNTs hybrid composite (HAMC) underwent dynamic recrystallization (DRX) and static recrystallization (SRX), resulting in a fine equiaxed recrystallized structure. This process also led to the formation of high-angle grain boundaries (HAGBs) through dislocation rearrangement. The SiC particles were evenly distributed within the matrix, ensuring good interface bonding between SiC and α-Al phases. Moreover, the CNTs reacted with the matrix, resulting in the in-situ formation of the Al4C3 phase at the interface. The addition of SiC/CNTs significantly increased the tensile strength of HAMC at 25°C and 250°C, from 319MPa and 178MPa to 438MPa and 331MPa. Examination of the fracture surface of the hybrid composite unveiled that void formation occurred primarily at the regions surrounding the matrix-particle interface.

Microstructure and Mechanical Properties of C/C Composites Modified by Single-Source Precursor Derived Ceramics

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Fabrication, Microstructural Evolution, and Mechanical Properties of SiC/(Hf0.25Ta0.25Zr0.25Nb0.25)C/C Nanocomposites

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Microstructure And Mechanical Properties Of Sic Ceramic Toughened With Tin Nanoparticles

Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites

Microstructures and properties of C/C–SiC composites derived from different gaseous carbon matrix precursors

3C-SiC Nanowires In-Situ Modified Carbon/Carbon Composites and Their Effect on Mechanical and Thermal Properties

Microstructure, mechanical properties and strengthening mechanism of in-situ synthesized TiC/6061 nanocomposites

Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires

Preparation and characterization of Si3N4-based composite ceramic tool materials by microwave sintering

Microstructure Evolution and Mechanical Behaviors of SiCp/CNTs Hybrid Reinforced Al-Si-Cu-Mg Composite by Semi-solid Stir Casting

Microstructure and mechanical properties of 3D Cf/SiBCN composites fabricated by polymer infiltration and pyrolysis

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites

Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites

Microstructure induced duplex Hall-Petch effect and its strengthening/toughening mechanisms in SiC@TC4 composites prepared by spark plasma sintering

Fabrication of (SiC-AlN)/ZrB2 Composite with Nano-Micron Hybrid Microstructure via PCS-Derived Ceramics Route

Microstructure and mechanical properties of aluminum alloy composites with endogenous nano-TiCp

Microstructure and Mechanical Properties of Unidirectional, Laminated Cf/SiC Composites with α-Al2O3 Nanoparticles as Filler

Study on Microstructures of Micron Si 3 N 4 Composite Ceramic with Addition of Nano SiC and SiC Whisker